Publikovat produkty
2641 Sequential mechanical basin mixer
2641 Sequential mechanical basin mixer
    DELABIE
    Archivovány

    2641 Sequential mechanical basin mixer

    Wall-mounted sequential mechanical basin mixer. Sequential mechanical mixer: opens and closes with cold water, with 70° turning range. Wall-mounted mixer with swivelling under spout L. 200mm with hygienic BIOSAFE outlet. Spout suitable for fitting a BIOFIL point-of-use filter. Spout can be easily fixed in place. Securitouch thermal insulation prevents burns. Ø 35mm standard ceramic cartridge with pre-set maximum temperature limiter. Body and spout with narrow tubes with smooth interiors and very low water volume. The speed that the water flows through these tubes reduces the development of biofilm considerably. Thermal shocks are possible without removing the control lever or shutting off the cold water supply. Flow rate regulated at 4 lpm. Chrome-plated brass body. Hygiene control lever L. 150mm requires no manual contact. Mixer with 150mm centres supplied with offset STOP/CHECK wall connectors M1/2" M3/4" ideal for hospitals. Recommended installation height: 110 - 200mm above the basin surface. Mechanical mixer ideal for healthcare facilities, retirement and care homes, hospitals and clinics. Sequential mixer suitable for people with reduced mobility. Mixer with 30-year warranty.
    Technická specifikace
    • Jedinečná ref. hodnota2641
    • Skupina výrobkůSanitary
    • Skupina produktůBasin mixer
    • TypObjekt
    • Datum zveřejnění2021-06-11
    • Číslo vydání1
    • Výška (mm)175
    • Šířka (mm)215
    • Hloubka (mm)282
    Související
    • Hlavní materiálMosaz
    • Navrženo vFrancie
    • Vyrobeno vFrancie
    • Čistá hmotnost (kg)1959
    Klasifikace
    • Kategorie objektu BIMSanita - Vodovodní baterie
    • Klasifikace IFCSvorkovnice pro sanitu
    • Kód ETIMEC011328
    • Název ETIMWashbasin mixing tap
    • Kód Uniclass 2015Pr_40_20
    • Popis Uniclass 2015Sanitary fittings and accessories
    • Kód CSI MasterFormat 201441 14 33
    • Název CSI MasterFormat 2014Mixers
    • Číslo OmniClass23-31 11 00
    • Název OmniClassFaucets
    Common.Footer.ValueProp.Image.AltText

    Design App pro Revit

    Načtěte rodiny přímo do svého modelu Revit jedním kliknutím

    Získejte místo pro snadnější přístup k novým objektům, ukládejte své rodiny Revit a spolupracujte se svým týmem.

    • ZaškrtnutíPracujte přímo s objekty BIM vedle Revitu
    • Zaškrtnutí 2 GB cloudové úložiště – ukládejte svůj obsah Revitu
    • Zaškrtnutí Získejte posouzení životního cyklu (A1–A3) uhlíku zabudovaného přímo z Revitu