G-1000 Aluminum Polyurethane-Injected Sectional Overhead Garage Door

Features and Benefits

INSULATION

• R-16

ALUMINUM 

• Pre-painted (5 coats), 0.60 mm thick aluminum is ideal for large-sized doors. Being very lightweight helps to extend the life of the components for doors with a large number of operation cycles.

HIGH-PRESSUREINJECTED POLYURETHANE

• Stronger and more energy-efficientinsulation 

• Solidly bonded to the aluminum sheetsproviding a section that is resistantto flexion. 

INTERLOK™TRIPLE-CONTACT JOINTS 

• Sections are strengthened by 2 aluminumwalls joined together with mechanicalinterlocking joints which are more solidthan just two bonded walls. 

• Their mechanical thermal breaks aremore efficient compared to thermalbreaks made with glue. 

• Triple-contact joints provide 2times more weathertightnessthan those of the competition.

METAL REINFORCEMENTPLATES 

• Provide stronger fastening for hingesand struts. These 14-gauge plates are2 times thicker than 20-gauge platesused by other manufacturers.

WOOD END BLOCKS 

• Provide a thermal break that is moreeffective than steel end caps whichform a thermal bridge. 

• As structural elements of the sections,the kiln-dried pine wood end blocksare installed at the outer ends of thesection. They are stronger than insulationcovered with a steel cap. 

LAG SCREW SYSTEM 

• Provides much better fastening ofthe end hinges. The lag screws engage8 threads into the wood, compared toa self-tapping screw going through asteel end cap engaging only about2 or 3 threads.