G1643, Emergency Shower, Horizontally Mounted, Plastic Shower Head

G1643
Emergency Shower, Horizontally Mounted, Plastic Shower Head

Application: Emergency shower for horizontal mounting.

Shower Head: 10" diameter orange ABS plastic with 20 GPM flow control.

Valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod.

Pipe and Fittings: 1" IPS galvanized steel nipple with orange ABS plastic elbow.

Supply: 1" NPT female inlet.

Sign: ANSI-compliant identification sign.

AVAILABLE OPTIONS
PCC All-polished chrome plated brass construction.
GRN Safety green ABS plastic shower head.
YEL Safety yellow ABS plastic shower head.
AP280-200 Electric flashing light and alarm horn unit for mounting on wall or vertical pipe. Light illuminates and horn sounds when shower is activated. Furnished complete with flow switch and mounting hardware.
TMV G6040 Thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2014. Refer to to Tempering Units section for complete technical and product selection information.
AP250-015 Modesty curtain for horizontal shower installation.

Specifikace

Attribute / Specification Field	Product Data Value
Manufacturer	Guardian Equipment
Model Number	G1643
Product Type	Horizontally Mounted Industrial Emergency Drench Shower
Installation Type	Overhead Horizontal Mount (Typically connects to a horizontal water supply line extending out through a finished wall or bulkhead)
Material Construction	Schedule 40 galvanized steel pipe and fittings for structural rigidity, defense against impact, and heavy-duty industrial use.
Shower Head Assembly	10" (254 mm) Diameter Bright Orange ABS Plastic drench shower head. Material is UV-stabilized and highly resistant to impact and chemical corrosion. Equipped with an internal 20 GPM (75.7 L/min) self-regulating flow control to deliver a uniform, deluge pattern.
Activation Valve	1" IPS Chrome-Plated Brass stay-open ball valve with a precision-ground ball and pure PTFE (Teflon®) seals. Activated by a heavy-duty mechanical link arm.
Mechanical Operator	29" (737 mm) Rigid Galvanized Steel Pull Rod featuring a large triangular pull handle. Pulling downward locks the valve into a continuous-flow state; it remains open until the rod is manually pushed upward back into the idle position.
Hydraulic Flow Regulation	Integrated flow control ensures a steady, velocity-controlled flood of water under varying system delivery pressures between 30 and 90 PSI.
Water Supply Inlet	1" NPT Female Top/Rear Horizontal Inlet
Compliance & Certifications	ANSI Z358.1-2014, SEI Certified, Uniform Plumbing Code (UPC), cUPC Listed 8116, OSHA Compliant
Quality Assurance	Valve housing, galvanized manifold, and plastic shower head assembly are fully hydrostatically pressure tested at the factory before shipping.
Included Accessories	ANSI-compliant high-visibility rigid identification sign, mechanical testing inspection tag

emergency drench shower, horizontal safety shower, plastic shower head, wall mounted shower, guardian equipment g1643, orange plastic shower, high visibility safety, laboratory safety fixture, industrial drench shower, overhead emergency shower, stay open valve, galvanized steel piping, chemical plant safety, refinery safety station, wastewater treatment shower, school lab fixture, high flow shower, rigid pull rod, triangular pull handle, industrial safety plumbing, osha compliant shower, ansi z358.1 drench, facility safety equipment, water saving flow control, rugged industrial shower, budget safety shower, commercial safety plumbing, ceiling line shower, horizontal pipe shower, deluge safety station, mechanical room safety, emergency decontamination, full body drench, factory tested safety, standard drench shower

Technická specifikace