G1691, Emergency Shower, Horizontally Mounted, All-Stainless Steel

G1691
Emergency Shower, Horizontally Mounted, All-Stainless Steel

Application: All-stainless steel emergency shower for horizontal mounting. Ideal for use in areas where highly corrosive materials are handled, as well as in laboratory and clean room applications.

Shower Head: 10" diameter stainless steel.

Valve: 1" IPS stainless steel stay-open ball valve. Valve has stainless steel ball and Teflon® seals. Furnished with stainless steel actuating arm and 29” stainless steel pull rod.

Pipe and Fittings: 1" IPS stainless steel.

Supply: 1" NPT female inlet.

Sign: ANSI-compliant identification sign.

AVAILABLE OPTIONS
AP280-100 Electric Light and Alarm Horn. Flashing light and horn serve to summon assistance when shower is activated.
TMV G6040 thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2014. Refer to Tempering Units section for complete technical and product selection information.
AP250-015Modesty curtain for horizontal shower installation.

Specifikace

Attribute / Specification Field	Product Data Value
Manufacturer	Guardian Equipment
Model Number	G1691
Product Type	Horizontally Mounted Industrial All-Stainless Steel Emergency Drench Shower
Installation Type	Overhead Horizontal Mount (Typically interfaces with a horizontal water supply line extending out through a finished wall or bulkhead)
Material Construction	Complete Stainless Steel Construction; structural piping, union fittings, nipple connections, and actuating hardware are crafted from heavy-gauge Schedule 40 Type 304 Stainless Steel.
Shower Head Assembly	10" (254 mm) Diameter Type 304 Stainless Steel drench shower head equipped with an internal 20 GPM (75.7 L/min) flow control regulator to provide an optimal, uniform deluge pattern.
Activation Valve	1" IPS Type 304 Stainless Steel stay-open ball valve with a Type 316 stainless steel ball and pure PTFE (Teflon®) seals. Mechanically linked to a heavy-duty stainless steel actuating arm.
Mechanical Operator	29" (737 mm) Rigid Stainless Steel Pull Rod. Pulling downward locks the valve into a continuous-flow state; it remains open until the rod is manually pushed upward back into the idle position.
Hydraulic Flow Regulation	Self-regulating flow control ensures a steady, velocity-controlled flood of water under varying system delivery pressures between 30 and 90 PSI.
Water Supply Inlet	1" NPT Female Top/Rear Horizontal Inlet
Compliance & Certifications	ANSI Z358.1-2014, SEI Certified, Uniform Plumbing Code (UPC), cUPC Listed 8116, OSHA Compliant
Quality Assurance	Complete valve housing and shower head manifold assembly are fully hydrostatically pressure tested at the factory before shipping.
Included Accessories	ANSI-compliant high-visibility rigid identification sign, mechanical testing inspection tag

emergency drench shower, horizontal safety shower, stainless steel shower, wall mounted shower, guardian equipment g1691, corrosive environment shower, cleanroom safety equipment, laboratory safety fixture, industrial drench shower, overhead emergency shower, stay open valve, type 304 stainless, chemical plant safety, refinery safety station, wastewater treatment shower, pharmaceutical cleanroom fixture, high flow shower, rigid pull rod, pull cord activation, industrial safety plumbing, osha compliant shower, ansi z358.1 drench, facility safety equipment, water saving flow, rugged industrial shower, marine washdown safety, commercial safety plumbing, ceiling line shower, horizontal pipe shower, deluge safety station, mechanical room safety, emergency decontamination, full body drench, factory tested safety, premium stainless shower

Technická specifikace