Archivovány

F3E Electronic washbasin tap F3EV1021

F3E washbasin tap DN 15 as finished installation kit for in-wall installation in basic installation kit, for sanitary facilities. Opto-electronically controlled, for connection to pre-mixed hot water or cold water. With solenoid valve, holding frame with profile seal, stainless steel cover plate 190 x 245 mm with covered screw fixing including sensor with control electronics and strainer. Visible parts made of high-polished chromium-plated brass. Spout with aerator with integrated flow regulator 3.0 l/min. Projection 260 mm, depth adjustability 25 mm. Activated water hygiene flushing 24 hours after last activation, safety switch-off with continuous reflection and saving of statistical data. With option for parameterization and communication via optional, bidirectional remote control. Separate power supply via power supply unit 6.75 V / 12 V DC.

Specifikace

Type of mounting In-wall installation with box
Type of operation Sensor operation
Power supply connection 6-12-VDC
Diameter nominal DN 15
Calculation flow rate cold water 0.10 liter per second
Functional principle Electronic self-closing
Minimum flow pressure 1.00 bar
Power consumption 1.50000
Volume flow rate at 3 bar 0.05 liter per second
Inlet size G-3-4-B
Type of mixing No mixing
Material casing Stainless steel
Material fitting Brass
Sound insulation No
Spout projection 260.00 mm
Surface finish casing Satin finished
Surface finish fitting Chromed
Type of tap In-wall tap
Depressurised No
Thermal disinfection No
Protective shutdown Yes
Default automatic hygiene flushing 24h after the last activity
Position of power connection Top
Type of sensor Opto-electronic sensor
Hygiene flushing Yes