Pig | Playground Equipment | Play Figure

Technical information

Equipment made of non-impregnated mountain larch

Peeled white
Palisades peeled white means that bark, cambium and sapwood are removed, the natural shape of the trunk is preserved and can be experienced

Ground anchor
All parts used for anchoring to the ground are made of hot-dip galvanised steel or stainless steel

Chains
Chains made of hot-dip galvanized steel (1.4301 / 1.4571 at extra charge) welded before galvanising, short-linked, without eyelets on the connecting parts, easy to exchange and shorten

Relief cut
Targeted relief cut as an effective measure against cracks caused by drying. The cut defines the position of the stress equalization in the trunk and minimises natural cracking

Whiskers made of PP rope, 16 mm, 3 strands.

• Pig: Height 0.45 m, Length 0.85 m, Width 0.60 m, Weight 40 kg

Components

• 1 Animal with foundation chain

Installation information

Surfacing requirements
Corresponding to a fall height of ≤ 0.60 m

Foundations

(only necessary in order to immobilise the equipment)

• 1 item: 30 x 30 x 20 cm
• Excavation depth: 50 cm

Attention:
Exact measurements may vary. For all installation dimensions, please refer to the current installation instructions.

Technical changes reserved.