S.I.A.I.

LATERIZI ALVEOLATER BIO CLASSE 60

ALVEOLATER® lightweight blocks with horizontal holes are lightened clay bricks, characterized by a gross bulk density between 500 and 680 kg/m³ and a hole percentage of 55% ≤ φ ≤ 70%. They are suitable for building infill walls, including in seismic zones, with no load-bearing function. Their layer configurations are complemented by layers of insulating material (synthetic or mineral fiber) in a cavity or as external insulation ("cappotto"). ALVEOLATER® horizontal-hole clay blocks are "smooth" elements, produced in various sizes and thicknesses. Available thicknesses range from 10 to 35 cm.

Specifikace

Muratura in blocchi di laterizio alleggerito forato, tipo Alveolater® 60 marcati CE in cat I S.A.C. 2+ secondo UNI EN 771-1. Classificazione dei blocchi secondo ex UNI 8942: forato per tamponamento UNI BF 00- Classification of blocks according to standard UNI EN 771-1: LD Block dimensions: cm ……x cm …… and height of cm …… Dimensional tolerance ……… (T1, T2, Tm according to UNI EN 771-1) Tolerance range ……… (R1, R2, Rm according to UNI EN 771-1). Gross bulk density …………… kg/m³ Tolerance ……… (D1, D2, Dm according to UNI EN 771-1). Installation: horizontal holes with class M …… mortar Horizontal and vertical mortar joints. The blocks must have a hole percentage between 60 and 70%. The equivalent thermal conductivity of the block will be determined through the calculation set out in standard UNI EN 1745:2012, based on the conductivity value given in Table A1 of Appendix A of standard UNI EN 1745:2012 as a function of the bulk density of the raw material used, or on an experimental value obtained on the clays used at the production plant, according to the methods and testing frequency established by the aforementioned standard. All declared characteristics will be documented through the attestation required for CE marking purposes, indicating the Certification Body and the certificate number if manufactured under control system 2+. The U-value (thermal transmittance) must not exceed ……… W/m²K. The Sound Reduction Index Rw of the wall must be no lower than ……… dB, based on experimental testing or calculation. These performance characteristics may also be documented through a manufacturer's declaration, with specific reference to test reports and/or calculations.

Technická specifikace

Jedinečná ref. hodnotaALVEOLATER
TypObjekt
Datum zveřejnění2026-09-08
Číslo vydání1

Odkazy

Související

Navrženo vItálie
Vyrobeno vItálie

Klasifikace

Kategorie objektu BIMStavební materiály - Zdivo
Klasifikace IFCZeď
Číslo OmniClass23-13 21 00
Název OmniClassBlocks and Bricks

Dostupnost regionu

Evropa
Ålandy
Albánie
Andorra
Belgie
Bělorusko
Bosna a Hercegovina
Bulharsko
Černá Hora
Česká republika
Chorvatsko
Dánsko
Estonsko
Faerské ostrovy
Finsko
Francie
Gibraltar
Guernsey
Irsko
Island
Itálie
Jan Mayen
Jersey
Kypr
Lichtenštejnsko
Litva
Lotyšsko
Lucembursko
Maďarsko
Malta
Moldavsko
Monako
Německo
Nizozemsko
Norsko
ostrov Man
Polsko
Portugalsko
Rakousko
Řecko
Rumunsko
Rusko
San Marino
Severní Makedonie
Slovensko
Slovinsko
Španělsko
Srbsko
Švédsko
Švýcarsko
Ukrajina
Vatikán
Velká Británie