Publikovat produkty

LOCKSMITH™ Series CLS Softeners for Hardness Reduction with Watts Exclusive Valve Controller, Pipe Size 1.5 - 2 IN - CLS

LOCKSMITH™ Series CLS Softeners for Hardness Reduction with Watts Exclusive Valve Controller, Pipe Size 1.5 - 2 IN - CLS

LOCKSMITH™ Series CLS Softeners for Hardness Reduction with Watts Exclusive Valve Controller, Pipe Size 1.5 - 2 IN - CLS

LOCKSMITH™ Series CLS Softeners for Hardness Reduction with Watts Exclusive Valve Controller, Pipe Size 1.5 - 2 IN - CLS

LOCKSMITH™ Series CLS Softeners for Hardness Reduction with Watts Exclusive Valve Controller, Pipe Size 1.5 - 2 IN - CLS

LOCKSMITH™ Series CLS Softeners for Hardness Reduction with Watts Exclusive Valve Controller, Pipe Size 1.5 - 2 IN - CLS

Watts LOCKSMITH™ Series CLS are 1.5 and 2 inch water softening systems offering simplex, duplex alternating, and 2, 3, or 4 tank progressive configurations. All systems are equipped with the Watts LOCKSMITH exclusive control valve which allows improved function through extensive programmable features. These pre-engineered systems are suitable for commercial applications ranging from 60,000 to 600,000 grains of hardness removal per tank and flow rates up to 119 gpm.

Specifikace

Features
- Watts LOCKSMITH exclusive controller for 1.5” and 2” systems
- Low salt alarm – Display alerts users when salt needs to be replenished
- Visual color screen for “at-a-glance” status
- Service contact screen – System alerts users when maintenance is required and provides dealer contact information
- Progressive mode – Link up to 4 softening systems together to operate in progressive mode with no additional control units required
- Remote regeneration – Supports remote regeneration input for automatic backwashing to increase softener efficiency
- Advanced programmable features including brine reclaim, AIO and more for optimal operation efficiency
- 2-12V relay outputs for increased configurability and ability to energize external equipment
- Extensive additional programmable capabilities

Technická specifikace

Jedinečná ref. hodnotacls-water-softener
Skupina výrobkůWater Quality & Rainwater Harvesting Solutions
Skupina produktůConditioning Solutions
TypObjekt
Datum zveřejnění2025-03-26
Číslo vydání1

Odkazy

Související

Navrženo vSpojené státy americké
Vyrobeno vSpojené státy americké

Klasifikace

Kategorie objektu BIMInstalace - Instalace
Kód ETIMEC011732
Název ETIMWater softener
Název UNSPSCPackaged water treatment systems
Kód UNSPSC47101522
Kód Uniclass 2015Ss_55_70_98
Popis Uniclass 2015Water treatment systems
Kód CSI MasterFormat 201422 31 00
Název CSI MasterFormat 2014Domestic Water Softeners
Číslo OmniClass23-27 55 27 11
Název OmniClassWater Softeners

Dostupnost regionu

Severní Amerika
Kanada
Spojené státy americké

Podobné produkty

Obrázek pro Lead Free* Reduced Pressure Zone Assemblies - LF009

Watts Lead Free* Reduced Pressure Zone Assemblies - LF009

4.5 (33)

Obrázek pro Lead Free* Reduced Pressure Zone Assemblies, Cast Iron - LF909

Watts Lead Free* Reduced Pressure Zone Assemblies, Cast Iron - LF909

4.3 (11)

Obrázek pro 12 in. Square x 6 in. Deep Sanitary Floor Sink - FS-730

Watts 12 in. Square x 6 in. Deep Sanitary Floor Sink - FS-730

Obrázek pro Lead Free* Reduced Pressure Valve Assembly Backflow Preventers with Flood Sensor - Small Diameter 3/4 - 2 Inch Sizes - LF909-FS - Small

Watts Lead Free* Reduced Pressure Valve Assembly Backflow Preventers with Flood Sensor - Small Diameter 3/4 - 2 Inch Sizes - LF909-FS - Small

4.2 (12)

Obrázek pro Reduced Pressure Zone Assemblies - 009

Watts Reduced Pressure Zone Assemblies - 009

4.8 (18)

Obrázek pro Downspout Nozzle - RD-940

Watts Downspout Nozzle - RD-940

4.3 (15)

Common.Footer.ValueProp.Image.AltText

Design App pro Revit

Načtěte rodiny přímo do svého modelu Revit jedním kliknutím

Získejte místo pro snadnější přístup k novým objektům, ukládejte své rodiny Revit a spolupracujte se svým týmem.

Pracujte přímo s objekty BIM vedle Revitu
2 GB cloudové úložiště – ukládejte svůj obsah Revitu
Získejte posouzení životního cyklu (A1–A3) uhlíku zabudovaného přímo z Revitu