ASSA ABLOY OH1082P overhead sectional door

Model:

ASSA ABLOY OH1082P fully balanced high insulated overhead sectional door with an excellent thermal transmittance value of 0.46 W/(m².k) for a 5.000 x 5.000 full panel door.

The 82 mm insulated door panels manufactured with a broken cold bridge to provide minimal thermal transmittance and reducing risk of condensation and ice formation. Optimized panel joint for even load distribution minimizing impact stress on panel hinges to prevent panel delamination and cracks. Door is designed and tested for 50,000 opening cycles. Facilitates a tight seal throughout the life cycle of the door. Secured by Design certified. Diamond pattern exterior panel finish.

Dimensions

Clear opening width   (2.000 mm - 8.000 mm)

Clear opening height  (2.150 mm* - 6.000 mm)

 *SL, LL, HL, HHL: DLH+HL ≥3000 mm

 *VL: limited to 5.500 mm

Standard equipment

Fully balanced, powder coated pretensioned springs, designed for a minimum 20.000 operating cycles, mounted on a 35 mm or hexagonal shaft.

Flat maintenance free hinges made of composite material with a stainless steel pin

EPDM perimeter and invisible horizontal joint seals  

Performance

To comply with European Standards

EN 12424        Wind resistance class 3 (width <4250mm) class 2 (width >4250mm)

EN 12425        Water penetration class 3 (70 pa resistance)

EN 12426        Air permeability class 3

EN 12428        Thermal transmittance 0,46 W (m².k)

EN 13501-1     Fire performance class B-S2,d0

DIN 4102         Fire performance class B2

EN 13241        CE marked with manufacturer’s declaration of conformity

ISO 9001         Quality management

ISO 14001       Environmental management

Compliant with L2A Building Regulations

Door panels

545 mm deep, 82 mm thick process laminated steel panels with internal steel bands positioned to ensure proper fixation of hinges and roller brackets throughout the products life span. CFC free insulation giving an optimum panel u value of 0.27 W/m² K

Panel design incorporates an external diamond profile steel skin for additional strength and aesthetic appearance with glossy finish at the section joints. Bottom profile equipped with oil resistant EPDM triple lip rubber seal to minimize leakage

Finish as delivered

Internal, monolithic, pre-coated polyester to RAL 9002

External pre-coated polyester from ASSA ABLOY standard range

RAL 1021 Rape Yellow, RAL 3002 Carmine Red, RAL 5010 Gentian Blue , RAL 6005 Moss Green, RAL 7016 Anthracite Grey, RAL 8017 Chocolate Brown, RAL 9002 White, RAL 9005 Jet Black, RAL 9006 Metallic Silver, RAL 9007 Silver Grey & RAL 9010 Pure White

Or Factory applied paint finish to the external face of the door panels in RAL ……

All rubber sealants from EPDM rubber, temp. resistant -30/+70 Celsius

All steel components electro galvanized

All parts should be system specific, designed for purpose

Tracks

2 piece galvanized tracks complete with 25 mm thermal movement provision

Standard Lift (SL) drop clearance, 485 mm

Low Lift (LL) drop clearance, 265 mm (≤250 kg)

High Lift (HL) drop clearance, HL+370 mm (HL ≤3400 mm),

HL+320 mm (HL >3400 mm and installed as VLT with beam)

High Lift (HHL) drop clearance, HL+350 mm

Vertical Lift (VL) drop clearance, DLH + 365 mm

Operator

Operating voltage: 230 V AC, 50/60 HZ (internal supply 3-phase 230 V AC)

Operating factor: ED = 30%, S3 10 min, non-continuous operation

(Engine operation 3 min, pause 7 min, direct-inverting)

Torque: 15-40 Nm, depending on reel type (value of given door shaft)

Fusing: 10 A

Brake: non-reversible worm gear

Speed monitor: electronic monitoring

Freewheel / clutch: mechanical engagement/disengagement

Limit switch: electronic via torque (setting “Door open” during programming) Setting “Door closed” in processor board

Gears: worm gear 1750 RPM yields approx. 24 rotations door shaft

Shaft: ø35 mm or hexagonal

Direct drive system

No special wall reinforcement necessary

Temperature range: -20°C to 60°C

Soft stop, soft start

Connection using “CEE plug” or lockable mains isolator

Safety rating IP 55.

If there is a power failure, the disengage device enables manual operation at any time

Maximum door weight: 

CDM9 = 400 kg 

CDM9 HD = >400 kg

CDM9 2H = 250 kg

Operating speed:

CDM9 0.25 m/s

CDM9 HD 0.18 m/s

CDM9 2H 0.5 m/s opening, 0.25 m/s closing

Control unit

• Control unit 920

Output 0.37 kW, input 1 x 230 V. Dimensions: 150 x 200 x 75 mm (w x h x d).Including control unit with standard actuator UP-STOP- DOWN. The door closes using dead-man controls

Safety rating IP 55

• Control unit 930

Output 0.37 kW, input 1 x 230 V. Dimensions: 150 x 200 x 75 mm (w x h x d). Including control unit with standard actuator UP-STOP- DOWN. The door closes using pulse control incl. self-monitoring safety edge

Safety rating IP 55.

• Control unit 950

Output 0.37 kW, input 1 x 230 V. Dimensions: 180 x 380 x 120 mm (w x h x d). Including control unit with standard actuator UP-STOP- DOWN. The door closes using pulse control incl. self-monitoring safety edge. Counter/error code display and servicing info display in top of control cabinet.

Safety rating IP 55

Safety device(s)

Spring break device

Safety factor six door cables

Safety factor 6 door cables

Locking mechanism

Interlocked sliding bolt with lock bolt switch

Warranty

1 YEAR / 2 YEAR / 3 YEAR / 4 YEAR / 5 YEAR extended manufacturer’s warranty available to secure optimum performance and longevity

Please consult ASSA ABLOY Entrance Systems technical literature for further details and the quotation for project specific notes

OPTIONS

Windows

  Sandwich glazing, Quadruple Acrylic (4 x 2 mm) rectangular, in high impact polystyrene frame, light opening: 553 x 248 mm

Door locking device

Second sliding shoot bolt

Lock with profile cylinder lockable on one or both sides

Control unit Options

• Radio remote control
• “Open” (if open button is used during closing process - door immediately stops and opens completely)
• Pull switch for OPEN / CLOSE
• External push-button, key switch
• “One-button function” - opens or closes door, depending on actual status (e.g. radio, pull switch)
• additional safety (e.g. photo cell, radar) – door immediately opens completely
• D-Module (D1, D2, D3, D4, D5, D6, D7)
• Photo cell, typically as a reset for automatic closing, some distance from the door
• Radar
• Magnetic loop
• Warning lights
• Traffic lights, on request
• Interlocking door function, on request
• Door/bridge interlock
• French Warning lights
• LED on door
• Indication open and/or closed door
• Additional 24 V DC, 430 mA

D-Module (automation module)

• D1 functions
• red lamps, inclusive, blinking continuously when door is moving
• red blinking light before “Automatic close”
• constant red light with door closed available
• Start time for blinking lights before closure can be set
• D7 - function incl

• D2 functions
• Magnetic loop, inclusive, with various functions, e.g
• “Safety and check back signal”
• “Open and check back signal”
• “Safety and open”
• “Open”
• A DIP switch can also be chosen to provide confirmation as additional safety
• D7 - function incl

• D3 - functions
• Interlocking door function or mutual interlocking between two doors
• Door/bridge interlocking
• Incl. 24 V AC max. 400 mA for additional units
• Relay for “Door open” or “Door closed”

• D4 functions
• Combination of D1 and D2
• red lamps (inclusive) blinking continuously when door is moving
• red blinking light (inclusive) before “Automatic close”
• constant red light with door closed available
• Start time for blinking lights before closure can be set
• A DIP switch can also be chosen to provide confirmation as additional safety
• D7 - function incl

• magnetic loop (inclusive) with various functions, e.g
• “Safety and check back signal”
• “Open and check back signal”
• “Safety and open”
• “Open”

• D5 functions
• Directional sensor traffic light (including red/green)
• Control of oncoming traffic in the doorway
• using “Open interior” or “Open exterior” to control oncoming traffic
• Oncoming traffic sees alternately red or green light, depending on which “Open command” is given first
• D3 - functions

• D6 functions
• Directional sensor traffic light with magnetic loop activation (inclusive), of “Open exterior”
• Control of oncoming traffic in the doorway
• using “Open interior” or “Open exterior” to control oncoming traffic
• Oncoming traffic sees alternately red or green light, depending on which “Open command” is given first

• D7 functions
• Interlocking door function or mutual interlocking between two doors
• Door/bridge interlocking
• Incl. 24 V AC max. 400 mA for additional units
• Relay for “Door open” or “Door closed”

Other supplementary equipment

• Anti-corrosive hardware

• Anti-corrosive package Type “C”

• Stainless steel hinges and roller brackets
• Stainless steel screws
• Stainless steel roller shafts and door cables
• Powder coated corner bracket (RAL 9002)

• Anti- corrosive package Type “A”

• Stainless steel hinges and roller brackets
• Stainless steel screws
• Stainless steel roller shaft and door cables
• Powder coated corner bracket (RAL 9002)
• Powder coated end caps, trusses, tracks, hangers, connection beams, safety pull bracket (RAL 9002)

• Anti- corrosive package Type “Z”

• Electro-galvanized springs (max. 70.000 cycles)

• Increased cycle spring (20.000 – 100.000)