SINTESI Wall WI-FI chronothermostat

SINTESI Wall WI-FI chronothermostat

Electronic chronothermostat with Wi-Fi connection, programming weekly and wall installation, designed for the regulation of the room temperature both in heating (winter) and in air conditioning mode (summer).
The free app, available on the AppStore and Google Play, allows this programming and complete control even from your smartphone or tablet. Any alarm situations are reported by sending a mail to the specified address.
The keyboard consists of four touch keys located on the sides of the display.

Specifikation
  • Electronic chronothermostat with Wi-Fi connection, weekly programming and wall installation, designed for adjusting the room temperature in both heating (winter) and air conditioning (summer) modes. The free App " Emmeti Sintesi ", available on the AppStore (for iOS systems) and Google Play (for Android systems) and compatible with Google Home and Amazon Echo, allows programming and complete control even from your smartphone or tablet. Any alarm situations are reported by sending an email to the specified address. The keypad consists of four touch keys located on the sides of the display. Technical data: Fixing: to the wall or to cover on a standard 503 box Power supply 230Vac (-15% ÷ + 10%) 50 / 60Hz Maximum consumption: 6 VA / 230Vac Relay capacity at 250 Vac: 5 A Operating modes: summer / winter / off Type of regulation: ON / OFF or proportional Differential: 0.1 ÷ 1 ° C Programming: weekly, minimum interval 1 hour Settable temperatures: 3 + manual + antifreeze Settable setpoint: 2 ÷ 50 ° C Measured temperature resolution: 0.1 ° C Measurement accuracy: 0.5 ° C Antifreeze temperature (excludable): 1 ÷ 50 ° C Ignition delay: 15, 30 or 45 minutes Accuracy of the clock: ± 1 s / day Keypad lock with password to prevent changes by unauthorized persons Automatic change of daylight saving time and automatic synchronization of date and time when connected to the network Operating temperature: 0 ÷ 50 ° C Storage temperature: -10 ÷ 65 ° C Operating humidity: 20% ÷ 90% RH non condensing Degree of protection: IP40 Delegated Regulation (EU) n. 811/2013; annex IV-3: - Class of the temperature control device: Class 4; Class IV - Contribution of the temperature control device to seasonal space heating energy efficiency in%: 2% Dedicated application " Emmeti Sintesi ", which allows you to remotely control the thermostat using your smartphone or tablet. In detail: - turn on and off the air conditioning system; - create and modify weekly programs; - change the values ​​of the operating temperatures; - simplify programming thanks to the copy-paste of a program over several days; - set holiday days in which the system remains off; - configure e-mail address to receive notifications when the measured temperature has exceeded a minimum or maximum value that can be set; - block the operation from the keyboard (local operation block"), allowing the control of the device only from the App itself. "
Teknisk specifikation
  • Unik ref.Chronothermostat_SINTESI_Wifi
  • ProduktfamilieTemperature Controls
  • ProduktgruppeSintesi
  • TypeShowcase (model)
  • Udgivelsesdato2020-10-27
  • Udgavenummer1
  • Højde (mm)85
  • Bredde (mm)130
  • Dybde (mm)28
Relateret
  • Materiale primærtPlast
  • Designet iItalien
  • Fremstillet iItalien
Klassifikation
  • BIMobject-kategoriHVAC - Kontrolpaneler
  • CSI MasterFormat 2014-kode23 09 00
  • CSI MasterFormat 2014-titelInstrumentation and Control for HVAC
  • OmniClass-nummer23-27 15 23
  • OmniClass-betegnelseHVAC Controls

Tilgængelighed i region

Europa
Åland
Albanien
Andorra
Belgien
Bosnien-Herzegovina
Bulgarien
Cypern
Danmark
Estland
Færøerne
Finland
Frankrig
Gibraltar
Grækenland
Guernsey
Holland
Hviderusland
Irland
Island
Isle of Man
Italien
Jan Mayen
Jersey
Kroatien
Letland
Liechtenstein
Litauen
Luxembourg
Malta
Moldova
Monaco
Montenegro
Nordmakedonien
Norge
Østrig
Polen
Portugal
Rumænien
Rusland
San Marino
Schweiz
Serbien
Slovakiet
Slovenien
Spanien
Storbritannien
Sverige
Tjekkiet
Tyskland
Ukraine
Ungarn
Vatikanstaten
Common.Footer.ValueProp.Image.AltText

Design App til Revit

Indlæs familier direkte ind i din Revit-model med ét klik

Få et sted til at få adgang til nye objekter nemmere, opbevar dine Revit-familier og samarbejd med dit team.

  • MarkeringArbejd direkte med BIM-objekter ved siden af Revit
  • Markering 2 GB cloudlager – gem dit Revit-indhold
  • Markering Få integreret CO2-LCA (A1-A3) direkte fra Revit