Publicer dine produkter

Prado Red Pressed Facing Brick

Prado Red Pressed Facing Brick

Cerámica Malpesa

Arkiveret

Prado Red Pressed Facing Brick

The pressing process involves crushing the clay between two facing presses, which force it into a mold in the shape of the final unit. The press surfaces are in relief to produce raised and sunken areas in the units. The outer shape of the unit produced therefore depends on the mold cavity. Facing bricks manufactured by pressing a mixture of clays and water. After drying off the water added for the extrusion, the bricks are fired in an oxidizing atmosphere in a Tunnel Kiln. Each model is burned at its own optimal firing temperature (always >1000º C). Due to the carbonate content in the clay, the suction (initial rate of water absorption) of these products is greater than 0.10 gr/cm2 minute. To avoid having to wet the bricks before they are laid (a necessary, although not always applied, measure with suction of over 0.10 gr/cm2 minute), they are there forewaterproofed by immersion or soaking with a silicon compound after leaving the kiln and before being packed. This treatment improves their layability, facilitates cleaning and keeps wall attractive and free from contamination over a long period of time.

Specifikation

Available sizes (mm): 240X120X50

Teknisk specifikation

Unik ref.Ladrillo-Caravista-Prensado-Rojo-Prado
ProduktfamilieLadrillo Caravista / Facing Brick
ProduktgruppePressed Facing Brick/Ladrillo Prensado
TypeObjekt (enkelt objekt)
Udgivelsesdato2019-08-01
Udgavenummer1
Højde (mm)50
Bredde (mm)240
Dybde (mm)120

Links

Produkt-URLhttp://www.malpesa.es/en/detalle_final_producto.php?idc=2&ids=6&id=106
Monteringsvejledninghttp://www.malpesa.es/pdf/publicaciones/M_Recom0903.pdf
Instruktionsvideohttp://www.malpesa.es/video.html
Produktcertificeringhttp://www.malpesa.es/pdf/CERTIFICADO_ER_13-11-2015.pdf
Teknisk beskrivelsehttps://www.malpesa.es/pdf/ladrillo/106--ficha.pdf

Relateret

Materiale primærtKeramik
Materiale sekundærtMurværk
Designet iSpanien
Fremstillet iSpanien
Nettovægt (kg)2.5

Klassifikation

BIMobject-kategoriByggematerialer - Bricks & Blokke
IFC-klassifikationVæg
UNSPSC-navnCeramic bricks
UNSPSC-kode30131602
Uniclass 2015-kodePr_20_93_52_15
Uniclass 2015-beskrivelseClay bricks
CSI MasterFormat 2014-kode04 21 13
CSI MasterFormat 2014-titelBrick Masonry
OmniClass-nummer23-13 21 19 13
OmniClass-betegnelseFace Bricks
CSI UniFormat II-kodeB2010
CSI UniFormat II-titelExterior Walls

Tilsvarende produkter

billede til ICMU Insultech Oldcastle OEBE Strecher Unit

Echelon ICMU Insultech Oldcastle OEBE Strecher Unit

billede til Swimming Pool Coping

Endicott Clay Products Co. Swimming Pool Coping

billede til Half brick thick, solid facing brick masonry. LM11,5-cv

Asociación HISPALYT Half brick thick, solid facing brick masonry. LM11,5-cv

billede til One brick thick, perforated facing brick masonry. LP24-cv

Asociación HISPALYT One brick thick, perforated facing brick masonry. LP24-cv

billede til Architectural Masonry Units - Gemstone®

York Building Products Architectural Masonry Units - Gemstone®

billede til Face Brick Ceniza Grey Clinker

Cerámicas Mora Face Brick Ceniza Grey Clinker

Common.Footer.ValueProp.Image.AltText

Design App til Revit

Indlæs familier direkte ind i din Revit-model med ét klik

Få et sted til at få adgang til nye objekter nemmere, opbevar dine Revit-familier og samarbejd med dit team.

Arbejd direkte med BIM-objekter ved siden af Revit
2 GB cloudlager – gem dit Revit-indhold
Få integreret CO2-LCA (A1-A3) direkte fra Revit