Exterior Wash Pro M CTC Outdoor-rated wash light with color temperature control

Physical

• Length: 152 mm (5.98 inch)
• Width: 201 mm (7.91 inch)
• Height: 303 mm (11.93 inch)
• Weight: 7.3 kg (16.1 lbs)

Dynamic Effects

• Intensity: 0 - 100%
• Color temperature control: 2400K - 6500K

Control and Programming

• Control systems: DMX, RDM
• User interface: Magnetic sensor for local diagnostics and focusing
• Stand-alone control: Up to 20 scenes with individual fade/hold times
• Control resolution: 8-bit DMX control of each color
• Dimmer resolution: 16-bit DMX control of intensity
• DMX channels: 3/3 (Standard/Basic)
• DMX compliance: USITT DMX512/1990
• RDM compliance: ANSI/ESTA E1.20
• DMX/RDM transceiver: Galvanic-isolated RS-485
• Firmware update: Serial upload via DMX link

Optics

• Light source:
  • 5 x 2400K LEDs
  • 5 x 4000K LEDs
  • 6 x 6500K white color LEDs
• Minimum LED lifetime: 100,000 hours (to >70% luminous output)*
• LED manufacturer: Cree
• Binning: Tight color and flux binning
• *Figure obtained under manufacturer's test conditions at Ta = 25° C.

Beam Angle Options

• Native beam angle: 7°
• Narrow micro lens: 9°
• Medium micro lens: 15°
• Wide micro lens: 30°
• Very Wide micro lens: 50°
• Asymmetric micro lens: 8° x 60°

Photometric Data

• CRI (Color Rendering Index): >70
• CCT: 2400K - 6500K (default 4000K)
• Luminous output:
  • 2400K: 2000 lm
  • 4000K: 4600 lm
  • 6500K: 3600 lm
• *All photometric data measured in steady state (30 minutes warm-up time) at 25 °C ambient.

Construction

• Housing: Cast aluminum
• Color: Traffic grey RAL 7042 (other colors available on request)
• Surface treatment: Anodized and electrostatic powder-coated
• Protection rating: IP66
• Effective Projected Area (EPA): 0.056 m² / 0.072 m²
• Impact resistance: IK08
• Corrosion resistance: C5 High (ISO 12944-6)
• Vibration resistance:
  • 1.0g, Sinusoidal (IEC 60068-2-6)
  • 0.7g RMS Random (IEC 60068-2-64)
  • 3.0g (ANSI C136-31)

Installation

• Mounting: Adjustable bracket
• Orientation: Any
• Minimum distance to illuminated surfaces: 0.1 m (0.3 ft)

Connections

• Power connection: 2 m (6.5 ft.) cable tail, open-ended
• Power input cable type:
  • EU models: H07RN-F 3G 1.0 mm², 450/750V, VDE
  • US models: PVC SJTW 3 x 1.31 mm² (16 AWG) 105° C 300 V VW-1
• Data connection: 2 m (6.5 ft.) open-ended, 6-conductor combined input + output cable tail
• Hybrid power/data cables (in & thru): 8-pin custom connectors available on request

Electrical

• AC power: 100 - 240 / 277 V nominal, 50/60 Hz
• Power supply unit: Auto-ranging electronic switch-mode
• Typical half-cycle RMS inrush current: 12 A
• Surge protection: 4 KV
• Max earth leakage: 0.5 mA
• Power factor:
  • 0.99 @110 V / 120 V
  • 0.94 @208 V / 230 V
  • 0.90 @277 V
• Max current draw:
  • 0.75 A @100 V
  • 0.62 A @120 V
  • 0.33 A @230 V
  • 0.27 A @277 V

Power Consumption

• Maximum: 75 W (reduced mode 60 W)*
• Idle: 2.5 W*
• *Measurements made at nominal voltage. Allow for a deviation of +/- 10%. Idle: all LEDs at zero intensity.

Thermal

• Cooling: Convection
• Maximum ambient temperature: 45° C (113° F)*
• Minimum ambient temperature: -30° C (-22° F)**
• Total heat dissipation: 256 BTU/hr (calculated, +/- 10%)
• *Above this temperature, the fixture regulates output to protect from overheating.
• Power must be maintained below -20° C (-4° F)

Environmental

• RoHS: Compliant
• REACH: Compliant
• WEEE: Compliant
• Proposition 65: Compliant
• Efficacy (max output): 63 lm/W
• LWR (Lumen-to-Weight Ratio): 603 lm/kg (273 lm/lb)*
• Packaging: FSC certified cardboard inlay and outer box

Approvals

• Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1)
• EU safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
• EU EMC: EN 55015, EN 55032, EN55035, EN 61547, EN 61000-3-2, EN 61000-3-3
• US safety: ANSI/UL 1598
• US EMC: 47 CFR Part 15 Class B
• Canadian safety: CSA C22.2 No. 250.0
• Canadian EMC: ICES 003(B), ICES 005(B)
• Australia/NZ: RCM
• United Kingdom: UKCA
• India: BIS IS 10322(Part5/section5)

Ordering Information - Fixtures

• Exterior Wash Pro M CTC, US, grey: P/N MAR-90590014
• Exterior Wash Pro M CTC, EU, grey: P/N MAR-90590010

Ordering Information - Accessories

• Micro Lens Pro M - Narrow: P/N MAR-90590031
• Micro Lens Pro M - Medium: P/N MAR-90590032
• Micro Lens Pro M - Wide: P/N MAR-90590033
• Micro Lens Pro M - Very Wide: P/N MAR-90590034
• Micro Lens Pro M - Asymmetric: P/N MAR-90590035
• Exterior Wash Pro Multitool: P/N MAR-90590025
• Hybrid PD cable tail In/Out 0.5 m, black: P/N MAR-91700020
• Attachment plate for safety wire: P/N MAR-90590050
• Baffle Snoot Pro M CTC: P/N MAR-90590022
• Hybrid PD cable tail In/Out 0.5 m, white: P/N MAR-91700022