ASSA ABLOY DL6030C combidock

Combidock extending bridge:
• Integrated frame with wall anchors (T-frames)
• Electro-hydraulic operation with two lifting cylinders
• Lip extension in aluminium, in three sections, each with an extender cylinder
• Control unit with selector for "Big Truck" and "City van" operation
• "Big Truck" operation:
The lip to be extended completely in one piece, total width 2000mm
• "City van" operation:
Only the central lip section is extended, width of central section 1000mm
• Automatic, free floating position
• Hydraulic emergency stop in any operating position
• Automatic mechanical locking in neutral position
• Lateral torsion flexibility
• Side plates (toe guards) with warning signs both above and below dock level
• Internal wiring, plug connection
• Power supply by others
• Control Unit Protection Class IP55
• Full compliance with with rules and regulations of the European Standard EN 1398

Dimensions:
Dimensions Vertical Working range

NL LH A B - inside LH* B - down to LP
3000 800 450 375 550
3500 900 560 360 650
4000 930 590 390 650

* When tail lift is in use Nominal width (NW) 2000mm.

Load capacity:
• "Big Truck" operation 60kN
• "City van" operation 20kN

Surface:
• Surface painted in standard colour RAL 5010, thickness 80µm

Hydraulics:
• Standard oil for temperature range -20°C - +60°C



Control unit:
• Voltage 400V 3-phase, 230V 3-phase , cable harness length 18m
• Impulse auto button to put the leveller back in parking position

Options:
Surface
 Surface painted in,RAL 3002, RAL 6005 or RAL 9005 thickness 80µm
 Surface painted with coat thickness 160µm
 Surface hot-dipped galvanised 80µm

Frame
 W-Frame (welded to pre-cast frame)

Hydraulics
 Low temperature oil for temperature range -30°C - +60°C
 Bio-oil (environmental protection)

Energy & Ergonomics
 EPDM gap sealing
 Slip protection and noise reduction coating

Multifunctional docking control for direct control of dock leveller, dock shelter and door with just one control unit
 Operating dock leveller and door