Rada Safetherm Panel Thermostatic Clinical Tap

Product Reference

Rada Safetherm Thermostatic Clinical Tap (1.1704.001)

Standard product features

Connections:

• Inlets: 15 mm Compression or ½” BSP Flat Face.

• Standard connections are: hot - left, cold - right. The inlet connectors are fixed at 200 mm centres.

Operation:

The Rada Safetherm has a single sequential control which when rotated initially opens the valve, then increases temperature from cold to a pre-set maximum. A 175 mm lever allows for simple wrist or elbow operation.

Temperature Range:

• Factory Pre-set (Blend): 41°C.

• Optimum Thermostatic Control Range: 35–43°C (achieved with supplies of 15–65°C hot and nominally equal pressures).

• Recommended Hot Supply: 60–65°C.

Note: The mixing valve can operate at higher temperatures for short periods without damage; however this could detrimentally affect thermostatic performance. For safety and performance reasons it is recommended that the maximum hot water temperature is limited to 65°C. Minimum recommended differential between hot supply and outlet temperature: 12°C.

Pressures/ Flow Rate:

• Maximum Static Pressure: 10 Bar.

• Maximum Maintained Pressure: 5 Bar.

Materials:

• Body: Chrome Plated Bass.

• Lever: Chrome Plated Zinc Casting.