Multi surface Twin Swing special | Playground Equipment | Swing

Technical information

Equipment made of mountain larch

Peeled white
Palisades peeled white means that bark, cambium and sapwood are removed, the natural shape of the trunk is preserved and can be experienced

Swing seat
Ergonomically shaped swing seat made of rubber with soft shock absorbing edge. Durable due to strong profiled steel insert

Swing joint
Drop-forged, hot-dip galvanised swing joint with sintered bush and integrated swivel

Profiled washer
Profiled washer for covering protruding screw heads according to standard, improved pressure distribution and protection against water. Impedes loosening the bolt

Adjustable
Adjustable two-piece bolt connection, easy to maintain, no projecting threads

Sintered bush
For all reciprocating movements we use sintered plain bearings which are self-lubricating in use and can easily be exchanged if necessary

Ground anchor
All parts used for anchoring to the ground are made of hot-dip galvanised steel or stainless steel

Cross beam made of steel
Swing cross beam made of hot-dip galvanized steel. Optimized swing geometry with rigid corner connections, thus allowing for smaller foundations and easier foundation covering

Chains
Chains made of hot-dip galvanized steel (1.4301 / 1.4571 at extra charge) welded before galvanising, short-linked, without eyelets on the connecting parts, easy to exchange and shorten

• Multi-surface Swing special: Height 2.55 m, Vertical clearance 2.35 m, Width 2.75 m, Depth 1.90 m, Weight 200 kg
• Multi-surface Twin Swing special: Height 2.55 m, Vertical clearance 2.35 m, Width 4.05 m, Depth 1.90 m, Weight 220 kg

Installation information

Surfacing requirements
Corresponding to a fall height of ≤ 1.50 m

Foundations

• 4 items: 60 x 70 x 40 cm
• Excavation depth: 60 cm

Attention:
Exact measurements may vary. For all installation dimensions, please refer to the current installation instructions.

Technical changes reserved.