AGEPAN® THD install pro

AGEPAN® THD install pro is a straight-edged wood fibre insulation board in accordance with DIN EN 13171, featuring an asymmetrical density profile and pre-milled installation channels. It is vapour-permeable, thermally insulating, and moisture-absorbent. The pre-milled grooves allow for quick and clean preparation of cable ducts, saving time and reducing mess.

The board can be directly screwed into place, saving material, time, and costs. Its high abrasion resistance reduces fibre residues in plaster, while the asymmetrical density profile provides exceptional strength and durability.

Pre-milled grooves for quick and clean creation of cable ducts
Direct screw fastening – saves material, time, and costs
Electrical installation possible without extra effort
High abrasion resistance – fewer fibres in plaster, saving time and material
Extremely high strength due to asymmetric density profile – reduced risk of damage
Vapour-permeable, thermally insulating, and moisture-absorbent

Specification

Technical Data: • Standard: EN 13171 • Raw density: ~230 kg/m³ • Nominal thermal conductivity λD: 0.047 W/mK • Rated thermal conductivity λB: 0.049 W/mK • Water vapour diffusion resistance factor µ: 3 • Compressive stress/strength: ≥ 200 kPa • Tensile strength perpendicular to the plane of the board: ≥ 10 kPa • Short-term water absorption: ≤ 1 kg/m² • Specific heat capacity: 2100 J/kgK • Maximum application temperature: 110 °C • Formaldehyde emission class: E1, NAF (<0.03 ppm) • Fire behavior: Euroclass E (DIN EN 13501-1) • Board marking: WF-EN 13171-T3-CS(10/Y)200-TR10-WS1,0-MU3 • Disposal: Waste wood category A2; AVV: 030105, 170202 Applications acc. to DIN 4108.10: • Wall: Insulation of timber frame, timber panel constructions, and similar cavities WH • Interior wall insulation WI • Insulation of room partitions WTR

Technical specification