Unique ref.: | xypex-modified |
---|---|
Brand: | Xypex |
Product family: | Concrete Waterproofing Coating Products |
Product group: | Modified |
Date of publishing: | 2019-01-25 |
Edition number: | 1 |
Type: | Object (single object) |
Crystalline, Concrete Waterproofing, Waterproof Concrete, Waterproof Coating, Bentonite, Bituthene, Positive Side Waterproofing, Negative Side Waterproofing, Below Grade
Xypex Modified can be applied as a second coat to reinforce Xypex Concentrate, or applied by itself to dampproof the exterior of foundation walls.
Applied as a second coat, Xypex Modified chemically reinforces Xypex Concentrate where two coats are required and produces a harder finish. Where dampproofing is required, a single coat of Modified may be used as an alternative to a spray/tar emulsion. Xypex prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials.
Xypex Modified is available in 60 lb. (27.2. kg) pails, 50 lb. (22.7 kg) bags.
Recommended for:
Advantages
Keywords: Crystalline, Concrete Waterproofing, Waterproof Concrete, Waterproof Coating, Bentonite, Bituthene, Positive Side Waterproofing, Negative Side Waterproofing, Below Grade
Crystalline, Concrete Waterproofing, Waterproof Concrete, Waterproof Coating, Bentonite, Bituthene, Positive Side Waterproofing, Negative Side Waterproofing, Below Grade
2.01 Materials
A. Acceptable Manufacturer:
Xypex Chemical Corporation
13731 Mayfield Place, Richmond, B.C., Canada V6V 2G9
Tel: 800 961.4477 or 604 273.5265
Fax: 604 270.0451
Website: www.xypex.com
Note: Acceptable manufacturers include all licensed manufacturing operations of Xypex Chemical Corporation.
B. Proprietary Products: Xypex crystalline concrete waterproofing materials as follows:
1. Xypex Concentrate
2. Xypex Modified
3. Xypex Patch’n Plug
Note: Supplemental specifications are available for Xypex Admix series (admixture) and Xypex Concentrate DS-1/DS-2 (dry shake).
C. Substitutions: No substitutions permitted.
D. Source Quality: Obtain all proprietary crystalline waterproofing products from a single manufacturer.
2.02 Mixes
A. General: Mix waterproofing material by volume with clean, potable water. Mix waterproofing material in quantities that can be applied within 20 to 30 minutes from time of mixing. As mixture thickens, stir frequently, but do not add additional water. Do not mix bonding agents or admixtures with crystalline waterproofing materials.
B. Brush Application Mix: Measure dry powder and place in mixing container. Measure water and mix into the dry powder with a paddle on a slow speed electric drill (250 RPM) or other type mixer which is acceptable to manufacturer. Mixing proportions shall be as follows:
Coverage
1.5 lb./sq.yd. (0.8 kg/m2)
2.0 lb./sq.yd. (1.0 kg/m2)
Proportions (by Volume)
5 powder to 2 water
3 powder to 1 water
C. Spray Application Mix: Mixing shall be same as specified for brush application except that mixture shall be thinner. Use following proportions as a guide only. Adjust proportions to match type of spray equipment and pressures used. Mixing proportions shall be as follows:
Coverage
1.5 lb./sq.yd. (0.8 kg/m2)
Proportions (by Volume)
5 powder to 3 water
D. Dry-Pac Mix: Using a trowel, mix 1 part clean water with 6 parts Xypex Concentrate powder for 10 to 15 seconds. It is acceptable that lumps may be present in mixture. Mix only as much as can be applied in 15 minutes.
Keywords: Crystalline, Concrete Waterproofing, Waterproof Concrete, Waterproof Coating, Bentonite, Bituthene, Positive Side Waterproofing, Negative Side Waterproofing, Below Grade
Product url: | https://xypex.com/products/coating-products/modified |
---|---|
Installation instructions: | https://xypex.com/products/installations/coating/general-information |
COBie Product Data Sheet: | |
Product certification: | |
Technical description: | https://xypex.com/docs/default-source/product-data/modified-NA.pdf |
Instruction video: | http://www.youtube.com/embed/iCXf5QD7REM |
GTIN code: |
The Qr code includes the static URL below and will bring you back to this page if scanned by a device like iPhone or smartphone
https://www.bimobject.com/en-nz/xypex/product/xypex-modified
Material main: | Other |
---|---|
Material secondary: | |
Designed in: | Canada |
Manufactured in: | Canada |
BIMobject Category: | Building Materials - Concrete |
---|---|
IFC classification: | Object |
Uniclass 1.4 Code: | JJ |
Uniclass 1.4 Description: | Waterproofing |
Uniclass 2.0 Code: | PR-55-14-96 |
Uniclass 2.0 Description: | Waterproofing Concrete Admixtures |
Uniclass 2015 Code: | Pr_20_31_03_95 |
Uniclass 2015 Description: | Waterproofing concrete admixtures |
NBS Reference Code: | 55-14-96 |
NBS Reference Description: | Waterproofing Concrete Admixtures |
CSI MasterFormat 2014 Code: | 07 16 16 |
CSI MasterFormat 2014 Title: | Crystalline Waterproofing |
OmniClass Number: | 23-13 25 17 19 13 |
OmniClass Title: | Crystalline Waterproofing |
Click these links for more information from AEC Daily
Name | Value |
---|---|
Education | https://www.aecdaily.com/sc.php?node_id=1593968&tabidx=education&company=Xypex+Chemical+Corporation&subtabidx=osp |
BIMobject®