AT Ytong ETIC wall - standard U=0,15 W/(m²K) d=477 mm
| Unique ref.: | COM_AT_Y_ETIC_standard_d_477 |
|---|---|
| Brand: | Ytong |
| Product family: | Ytong AAC |
| Product group: | Composite |
| Width (mm): | 1000 |
| Height (mm): | 1000 |
| Depth (mm): | 477 |
| Date of publishing: | 2017-09-14 |
| Edition number: | 1 |
| Type: | Object (single object) |
Downloads
-
ARCHICAD
AT_Ytong_ETIC_standard_d_477_R_1-5625_Plain_ac20.xml - Plain construction AT Ytong ETIC wall - standard d=477 mm R=1,5625 m²K/W
-
ARCHICAD
AT_Ytong_ETIC_standard_U_0,15_d_477_Composite_1.xml - Composite construction AT Ytong ETIC wall - standard d=477 mm U= 0,15 W/(m²K)
-
PDF
DE Ytong General Information Guideline Austria 20170801.pdf - DE General Information Guideline
-
PDF
EN Ytong General Information Guideline Austria 20170801.pdf - EN General Information Guideline
-
Revit
AT_Ytong_ETIC_standard_d_477_R_1-5625_Plain.rte - Plain construction AT Ytong ETIC wall - standard d=477 mm R=1,5625 m²K/W
-
Revit
AT_Ytong_ETIC_standard_U_0,15_d_477_Composite_1.rte - Composite construction AT Ytong ETIC wall - standard d=477 mm U= 0,15 W/(m²K)
-
Revit Installer
Ytong Wall Soluton for Revit v1.41 2016-11-10.exe - Ytong Wall Solution for all countries (Revit 2014, 2015, 2016)
The Ytong Verbundstein is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class P2 is ideal for walls that are optimized for thermal insulation. The quality class P4 is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use.
Advantages:
- thermal conductivity from λ = 0.11 W/(mK)
- Homogeneous, isotropic
- Provides healthy, balanced room climate
- Very high fire protection level: EI90 from 7.5 cm
- Economical and stable in value
- Ergonomic processing
Advantages:
- thermal conductivity from λ = 0.11 W/(mK)
- Homogeneous, isotropic
- Provides healthy, balanced room climate
- Very high fire protection level: EI90 from 7.5 cm
- Economical and stable in value
- Ergonomic processing
Wall kit for load-bearing standard ETIC walls, made of Ytong Verbundstein PV 4-0,60 units d=250 mm and 200 mm EPS ETIC.
Construction - U=0,15 W/(m²K)
15 mm Internal plastering (e.g. lime-gypsum-cement plaster)
250 mm Ytong Ytong Thermoblock PV 4-0,60 GTIN: 4054640017573
5 mm EPS Bonding mortar
200 mm EPS-facade insulation board
5 mm EPS reinforcement layer with mesh (reinforcement fabric)
2 mm Silicone-resin plaster
During planning and bulding the masonry shall be taken into account: ÖNORM EN 1996 including the national annexes, ÖNORM B 3209, ÖNORM B 3358-4 as well as statutory and private-law regulations.
Technical characteristics of the Ytong masonry:
Converted average unit compressive strength fB = 5.0 N/mm²
Characteristic masonry compressive strength fK = 2.95 N/mm²
Characteristic initial shear strength of masonry fvk0 = 0.30 N/mm²
Calculated dead load γ = 7.2 kN/m³
Calculated thermal conductivity λ = 0.16 W/(mK)
Heat storage capacity c = 1.0 MJ/kg
Weighted sound reduction index (masonry unplastered) Rw = 45.2 dB
Fire resistance class EI-M 90 / REI 180 / REI-M 90
The present tool supports you in the planning of masonry made of Ytong Verbundstein, but it does not replace the own technical examination by the user with respect to the intended use and suitability. The use of the tool and changes within the tool must therefore be verified independently. The object proposed by the system must conform to local regulations. The use of the object must therefore be verified independently.
Construction - U=0,15 W/(m²K)
15 mm Internal plastering (e.g. lime-gypsum-cement plaster)
250 mm Ytong Ytong Thermoblock PV 4-0,60 GTIN: 4054640017573
5 mm EPS Bonding mortar
200 mm EPS-facade insulation board
5 mm EPS reinforcement layer with mesh (reinforcement fabric)
2 mm Silicone-resin plaster
During planning and bulding the masonry shall be taken into account: ÖNORM EN 1996 including the national annexes, ÖNORM B 3209, ÖNORM B 3358-4 as well as statutory and private-law regulations.
Technical characteristics of the Ytong masonry:
Converted average unit compressive strength fB = 5.0 N/mm²
Characteristic masonry compressive strength fK = 2.95 N/mm²
Characteristic initial shear strength of masonry fvk0 = 0.30 N/mm²
Calculated dead load γ = 7.2 kN/m³
Calculated thermal conductivity λ = 0.16 W/(mK)
Heat storage capacity c = 1.0 MJ/kg
Weighted sound reduction index (masonry unplastered) Rw = 45.2 dB
Fire resistance class EI-M 90 / REI 180 / REI-M 90
The present tool supports you in the planning of masonry made of Ytong Verbundstein, but it does not replace the own technical examination by the user with respect to the intended use and suitability. The use of the tool and changes within the tool must therefore be verified independently. The object proposed by the system must conform to local regulations. The use of the object must therefore be verified independently.
| Product url: | https://www.ytong.at/ytong-verbundstein.php |
|---|---|
| Installation instructions: | https://www.ytong.at/ytong-verbundstein.php |
| COBie Product Data Sheet: | |
| Product certification: | https://www.ytong.at/de/docs/Ytong-Verbundstein-PV4-060-25cm-O25cm.pdf |
| Technical description: | https://www.ytong.at/ytong-verbundstein.php |
| Instruction video: | |
| GTIN code: |
The Qr code includes the static URL below and will bring you back to this page if scanned by a device like iPhone or smartphone
https://www.bimobject.com/en-nz/ytong/product/com_at_y_etic_standard_d_477
| Material main: | Autoclaved aerated concrete |
|---|---|
| Material secondary: | Plaster |
| Designed in: | Austria |
| Manufactured in: | Austria |
| BIMobject Category: | Walls - External Walls |
|---|---|
| IFC classification: | Wall |
| UNSPSC name: | Bricks |
| UNSPSC code: | 301316 |
| Uniclass 1.4 Code: | L83122 |
| Uniclass 1.4 Description: | Wall units |
| Uniclass 2.0 Code: | SS-25-13-50 |
| Uniclass 2.0 Description: | Masonry Wall Systems |
| Uniclass 2015 Code: | Ss_25_13_50 |
| Uniclass 2015 Description: | Masonry wall systems |
| NBS Reference Code: | 25-13-50 |
| NBS Reference Description: | Masonry Wall Systems |
| CSI MasterFormat 2014 Code: | 04 22 26 |
| CSI MasterFormat 2014 Title: | Autoclaved Aerated Concrete Unit Masonry |
| OmniClass Number: | 23-13 35 21 13 |
| OmniClass Title: | Masonry Structural Walls |
| CSI UniFormat II Code: | B2010 |
| CSI UniFormat II Title: | Exterior Walls |
This product is available in:
Europe
- Austria
BIMobject®