DMPS3-4K-150-C - 3-Series® 4K DigitalMedia™ Presentation System 150

Operating System

Crestron 3-Series; real-time, preemptive, multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs; preloaded DMPS3 .AV Framework Base Program; out-of-the-box "Crestron Connect It" functionality

Control System Memory
SDRAM - 1 GB
Flash - 4 GB

Communications
Ethernet - 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1X, SNMP, BACnet™/IP [11], IPv4 or IPv6, Active Directory authentication, IIS v.6.0 web server, SMTP e-mail client, RSTP, Private Network Mode
Cresnet - Cresnet master mode
USB - USB host ports for Crestron Connect It devices and firmware update via USB flash drive; USB device port for computer console (setup); supports USB signal routing via select DM transmitters and receivers, or via USB-EXT-DM extenders [10]
RS-232 - 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking
IR/Serial - 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud; built-in RC-5 compatible IR receiver
DigitalMedia - DM 8G+, HDCP, EDID, CEC, PoDM, Ethernet
HDBaseT - HDCP, EDID, CEC, RS-232, PoE, Ethernet
HDMI - HDCP, EDID, CEC
NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI and HDBaseT devices and the control system

Video
Switcher - 10x1 (organized as multi-format 6x1), auto-switching, auto-detecting multi-format digital/analog source inputs, QuickSwitch HD technology
Scaler - 4K video scaler, motion-adaptive deinterlacer, intelligent frame rate conversion, Deep Color support, 3D to 2D conversion [7], content-adaptive noise reduction, widescreen format selection (zoom, stretch, maintain aspect-ratio, or 1:1)
Input Signal Types - HDMI w/Deep Color, 3D, & 4K (DVI & Dual-Mode DisplayPort compatible [4]); DM 8G+ & HDBaseT w/Deep Color, 3D, & 4K; RGB/VGA (RGBHV, RGBS, RGsB); component (YPbPr); S-Video (Y/C); composite (NTSC, PAL) [5]
Output Signal Types - HDMI w/Deep Color, 3D, & 4K (DVI compatible [4]); DM 8G+ & HDBaseT w/Deep Color, 3D, & 4K
Analog-To-Digital Conversion - 10-bit 165 MHz per each of 3 channels

Connectors - Control & Power
RELAY 1 – 2 - (1) 4-pin 3.5 mm detachable terminal block; Comprises (2) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts
INPUT 1 – 2 - (1) 3-pin 3.5 mm detachable terminal block; Comprises (2) programmable digital inputs; Input Voltage Range: 0 to 24 Volts DC, referenced to GND; Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band; Input Impedance: 10k Ohms at >5 Volts, 1M Ohms at <5 Volts; Pull-up Resistor: 2.2k Ohms per input
IR OUT - (1) 3.5 mm mini-phone jack; IR/Serial output port; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
COM - (1) 5-pin 3.5 mm detachable terminal block; Bidirectional RS-232 port; Up to 115.2k baud, hardware and software handshaking support
LAN - (1) 8-pin RJ45 female; 10Base-T/100Base-TX Ethernet port
USB 1 – 4 - (4) USB Type A female; USB 2.0 host ports for TT-100 series Crestron Connect It Cable Caddies[1]; Also enables firmware update via USB flash drive
G - (1) 6-32 screw, chassis ground lug
NET - (1) 4-pin 3.5 mm detachable terminal block; Cresnet Master port; Available Cresnet Power: 24 Watts
100-240V~1.4A 50/60Hz - (1) IEC 60320 C14 main power inlet; Mates with removable power cord, included
COMPUTER (front) - (1) USB Type B female; USB computer console port; For setup only
IR IN (front) - (1) Infrared sensor; IR Frequency: 36 to 38 kHz; IR Formats: Crestron format, RC5; Allows control from IR wireless remotes using the Crestron or RC-5 command sets

Controls & Indicators
PWR - (1) Bi-color green/amber LED, indicates operating power supplied from AC line power, turns amber while booting and green when operating
NET - (1) Yellow LED, indicates Cresnet bus activity
MSG - (1) Red LED, indicates internal control system has generated an error message
HW-R - (1) Recessed pushbutton for hardware reset, reboots the control system
SW-R - (1) Recessed pushbutton for software reset, restarts the software program
AUTO INPUT SELECT - (1) Pushbutton and bi-color green/amber LED, selects auto-switching mode
VGA INPUT SELECT 1 – 4 - (4) Pushbuttons for manual input selection, and (4) bi-color green/amber LEDs to indicate the current active input and signal presence at each corresponding VGA input
HDMI INPUT SELECT 1 – 4 - (4) Pushbuttons for manual input selection, and (4) bi-color green/amber LEDs to indicate the current active input and signal presence at each corresponding HDMI input
DM INPUT SELECT 1 – 2 - (2) Pushbuttons for manual input selection, and (2) bi-color green/amber LEDs to indicate the current active input and signal presence at each corresponding DM input
VOLUME - (1) Continuous turn rotary encoder, adjusts the analog audio output volume
DM IN 1 – 2 (rear) - (4) LEDs, green LEDs indicate DM link status, amber LEDs indicate video and HDCP signal presence, for each corresponding DM input
DM OUT (rear) - (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence, for the DM output
LAN (rear) - (2) LEDs, bi-color LED (left) indicates Ethernet speed and activity, green LED (right) indicates Ethernet link status

Power
Main Power - 1.4 Amps @ 100-240 Volts AC, 50/60 Hz
Power Consumption - 42 Watts typical, 27 Watts idle
Available Cresnet Power - 24 Watts
Power over DM (PoDM) - IEEE 802.3at compliant PoDM PSE (Power Sourcing Equipment), each DM IN/OUT port supplies up to 15.4 Watts to power one PoDM (Class 0-3) PD (Powered Device) [12]
Power over HDBaseT - IEEE 802.3at PoE compliant PSE (Power Sourcing Equipment), each DM IN/OUT port supplies up to 15.4 Watts to power one HDBaseT PoE (Class 0-3) PD (Powered Device) [12]

Environmental
Temperature - 41° to 104° F (5° to 40° C)
Humidity - 10% to 90% RH (non-condensing)
Heat Dissipation - 142 BTU/hr typical, 93 BTU/hr idle

Enclosure
Chassis - Metal, black finish, fan-cooled, vented sides
Front Panel - Metal, black finish with polycarbonate label overlay
Mounting - Freestanding, 1 RU 19-inch rack-mount, or under-table mount (adhesive feet, rack ears, and under-table mounting brackets included)

Dimensions
Height - 1.74 in (45 mm) without feet
Width - 17.28 in (439 mm); 18.94 in (482 mm) with rack ears
Depth - 10.47 in (266 mm)
Weight - 6.4 lb (2.9 kg)

1. Item(s) sold separately.
2. The AirMedia Presentation Gateway, model AM-101, requires one HDMI input on the DMPS3-4K-150-C.
3. Some features and functions described in this spec sheet may not be supported using .AV Framework. For a complete list of capabilities and options supported by .AV Framework, please visit: www.crestron.com/avframework.
4. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.
5. The VGA inputs can accept component, composite, and S-Video signals using an appropriate adapter (not included). However, input sync detection is not provided for composite or S-Video signal types.
6. When using an analog audio input in combination with an HDMI video input, the source’s video resolution must be 1920x1200 or lower. The analog audio input will not pass audio if the source’s video resolution is higher than 1920x1200.
7. Automatically passes 3D video if the display device supports it (reverts to pass-through mode without scaling). Provides automatic 3D-to-2D conversion (with scaling) if the display device does not support 3D.
8. Routing of a multichannel audio signal via a digital input and output (HDMI or DM) requires the input to be set for “mixer bypass” mode. When that input is selected, all audio controls on the digital output are disabled and the ability to route the microphone signal to that output is defeated. Mixer bypass mode also disables the Input Compensation control on that input.
9. The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “DM 8G+ & HDBaseT Maximum Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.
10. Manages the routing of USB HID signals between peripheral DM devices that are equipped with USB HID ports. The USB ports onboard the DMPS3-4K-150-C are not usable for USB signal routing. Also programmable to manage the routing of USB signals between Crestron USB over Ethernet Extender modules (USB-EXT-DM, sold separately). Refer to the USB-EXT-DM spec sheet for more information.
11. License required. The DMPS3-4K-150-C supports a maximum of 500 BACnet objects when dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size and complexity.
12. Due to the inherent power loss that occurs over CATx cable, a maximum of 12.95 Watts is delivered at each PoDM or HDBaseT PoE powered device. Any wiring that is connected to a PoDM or HDBaseT PoE PSE port is for intra-building use only and should not be connected to a line that runs outside of the building in which the PSE is located.