MM-10 Miniature SubwooferMM-10 Miniature SubwooferMM-10 Miniature SubwooferMM-10 Miniature SubwooferMM-10 Miniature SubwooferMM-10 Miniature SubwooferMM-10 Miniature SubwooferMM-10 Miniature SubwooferMM-10 Miniature SubwooferMM-10 Miniature Subwoofer
View previous images
View next images

MM-10 Miniature Subwoofer

The MM-10 miniature subwoofer delivers expanded low frequency for applications that require excellent audio quality from a compact system. Designed primarily as a companion to Meyer Sound's MM-4XP miniature loudspeaker, as well as the UP-4XP ultracompact loudspeaker, the MM-10 allows system designers to create full-range systems where space limitations are a concern. 

FEATURES AND BENEFITS

  • Powerful low-frequency response from a very small cabinet
  • Low distortion affords exceptionally clean bass
  • Adaptable to complement MM-4XP and UP-4XP loudspeakers
  • Versions include 48 V DC external power supply or built-in AC power for driving satellite loudspeakers

APPLICATIONS

  • Background music
  • Small theatres
  • Portable AV systems
  • Compact voice reinforcement systems


Specification
  • Architect Specifications (All Variants)

    The loudspeaker shall be a self-powered, sub-bass system with one 10-inch cone driver (with a 2-inch voice coil) rated to handle 400 watts. The loudspeaker shall incorporate internal processing electronics and a single-channel class D amplifier. Processing functions shall include equalization, phase correction, signal division, and driver protection. Amplifier output power shall be 220 W (440 W peak). Distortion (THD, IM, TIM) shall not exceed 0.02%. Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 33 Hz to 228 Hz; phase response, ±45° from 38 Hz to 138 Hz; maximum peak SPL, 123 dB at 1 meter, measured free field. Coverage shall be 360 degrees. Loudspeaker components shall be mounted in a cabinet constructed of multi-ply hardwood with a black textured finish. Its front protective grille shall be hex-stamped steel with black mesh screen.

    The loudspeakers shall be the Meyer Sound MM‑10XP, MM‑10AC, or MM‑10ACX.

    Architect Specifications: MM-10XP
    The loudspeaker shall be equipped with either a Phoenix 5-pin male or EN3 5-pin male connector (three pins for balanced audio and two pins for DC power). The audio input shall be electronically balanced with a 10-kOhm impedance and accept a nominal –2.0 dBV (0.8 V rms, 1.1 V peak) input signal. DC blocking and RF filtering shall be provided, and CMRR shall be greater than 50 dB and typically 80 dB (50 Hz to 500 Hz). Power requirements for the loudspeaker shall be an external Meyer Sound MPS-488HP IntelligentDC power supply capable of delivering 48 V DC. Current draw during burst (< 1 sec) shall be 2.5 A rms at 48 V DC; current inrush during turn-on shall not exceed 7.0 A peak at 48 V DC. Dimensions shall be 19 inches wide x 11 inches high x 12 inches deep (482 mm x 279 mm x 305 mm). Weight shall be 26.7 lbs (12.11 kg).

    The loudspeaker shall be the Meyer Sound MM‑10XP.

    Architect Specifications: MM-10AC
    The audio input shall be electronically balanced with a 10-kOhm impedance and accept a nominal –2.0 dBV (0.8 V rms, 1.1 V peak) input signal. Connectors shall be XLR female for input and XLR male for loop output. DC blocking and RF filtering shall be provided, and CMRR shall be greater than 50 dB and typically 80 dB (50 Hz to 500 Hz). Power requirements shall be nominal 100 V, 110 V, or 230 V AC line current at 50–60 Hz. UL and CE operating voltage ranges shall be 100 to 240 V AC. AC power connectors shall be powerCon 20 with looping output. Current draw during burst (< 1 sec) shall be 0.9 A rms at 115 V, 0.4 A rms at 230 V AC, and 1.1 A peak at 100 V AC; current inrush during turn-on shall not exceed 4.0 A rms at 115 V AC, 2.4 A rms at 230 V AC, and 4.0 A peak at 100 V AC. Dimensions shall be 19 inches wide x 11 inches high x 12 inches deep (482 mm x 279 mm x 305 mm). Weight shall be 28.2 lbs (12.79 kg).

    The loudspeaker shall be the Meyer Sound MM‑10AC.

    Architect Specifications: MM-10ACX
    The audio input shall be electronically balanced with a 10-kOhm impedance and accept a nominal –2.0 dBV (0.8 V rms, 1.1 V peak) input signal. Three XLR female input connectors shall be provided, one for the subwoofer and two for satellite loudspeakers. DC blocking and RF filtering shall be provided, and CMRR shall be greater than 50 dB and typically 80 dB (50 Hz to 500 Hz). Two output connectors shall be provided for routing balanced audio and 48 V of DC power to the satellite loudspeakers. Satellite output connectors shall be either Phoenix 5-pin male or EN3 5-pin female (three pins for balanced audio, two pins for DC power). An input select switch shall determine whether the subwoofer receives its source from the subwoofer input or from the satellite inputs (summed). The subwoofer output shall be adjusted with a gain control. Power requirements shall be nominal 100 V, 110 V, or 230 V AC line current at 50–60 Hz. UL and CE operating voltage range shall be 100 to 240 V AC. AC power connectors shall be powerCon 20 with looping output. Current draw during burst (< 1 sec) shall be 1.1 A rms at 115 V, 0.6 A rms at 230 V AC, and 1.3 A peak at 100 V AC; current inrush during turn-on shall not exceed 6.6 A rms at 115 V AC, 3.7 A rms at 230 V AC, and 7.2 A peak at 100 V AC. Dimensions shall be 19 inches wide x 11 inches high x 12 inches deep (482 mm x 279 mm x 305 mm). Weight shall be 30.8 lbs (13.97 kg).

    The loudspeaker shall be the Meyer Sound MM-10ACX

    Keyword: Subwoofer, Subwoofers, Loudspeaker, Loudspeakers

Technical specification
  • Unique ref.meyersound-mm-10
  • Collection setLoudspeakers
  • CollectionULTRA
  • TypeObject (single object)
  • Date of publishing2020-03-12
  • Edition number2
Related
  • Designed inUnited States
  • Manufactured inUnited States
Classification
  • BIMobject CategoryElectronics - Audio Electronics

Region availability

Europe North America Asia Africa Oceania South America
Albania
Anguilla
Afghanistan
Egypt
American Samoa
Argentina
Andorra
Antigua and Barbuda
Bahrain
Algeria
Australia
Bolivia
Austria
Aruba
Israel
Angola
Cook Islands
Brazil
Belarus
Barbados
Jordan
Benin
Federated States of Micronesia
Chile
Belgium
Belize
Kuwait
Botswana
Fiji
Colombia
Bosnia and Herzegovina
Bermuda
Lebanon
Burkina Faso
French Polynesia
Ecuador
Bulgaria
British Virgin Islands
Oman
Burundi
Guam
Falkland Islands (Islas Malvinas)
Croatia
Canada
Palestine
Cameroon
Kiribati
French Guiana
Cyprus
Caribbean Netherlands
Qatar
Cape Verde
Marshall Islands
Guyana
Czech Republic
Cayman Islands
Saudi Arabia
Central African Republic
Nauru
Paraguay
Denmark
Collectivity of Saint Martin
Syria
Chad
New Caledonia
Peru
Estonia
Costa Rica
Turkey
Comoros
New Zealand
Suriname
Faroe Islands
Cuba
United Arab Emirates
Côte d'Ivoire
Niue
Uruguay
Finland
Curaçao
Yemen
Democratic Republic of the Congo
Norfolk Island
Venezuela
France
Dominica
Armenia
Djibouti
Northern Mariana Islands
Germany
Dominican Republic
Azerbaijan
Equatorial Guinea
Palau
Gibraltar
El Salvador
Bangladesh
Eritrea
Papua New Guinea
Greece
Greenland
Bhutan
Ethiopia
Pitcairn Islands
Guernsey
Grenada
British Indian Ocean Territory
Gabon
Samoa
Hungary
Guadeloupe
Brunei
Ghana
Solomon Islands
Iceland
Guatemala
Cambodia
Guinea
Timor-Leste
Ireland
Haiti
China
Guinea-Bissau
Tokelau
Isle of Man
Honduras
Christmas Island
Kenya
Tonga
Italy
Jamaica
Cocos (Keeling) Islands
Lesotho
Tuvalu
Jersey
Martinique
Georgia
Liberia
United States Minor Outlying Islands
Latvia
Mexico
Hong Kong
Libya
Wallis and Futuna
Liechtenstein
Montserrat
India
Madagascar
Vanuatu
Lithuania
Nicaragua
Indonesia
Malawi
Luxembourg
Panama
Japan
Mali
Macedonia (FYROM)
Puerto Rico
Kazakhstan
Mauritania
Malta
Saint Kitts and Nevis
Kyrgyzstan
Mauritius
Moldova
Saint Lucia
Laos
Mayotte
Monaco
Saint Pierre and Miquelon
Macau
Morocco
Montenegro
Saint Vincent and the Grenadines
Malaysia
Mozambique
Netherlands
Saint-Barthélemy
Maldives
Namibia
Norway
Sint Maarten
Mongolia
Niger
Poland
The Bahamas
Myanmar (Burma)
Nigeria
Portugal
Trinidad and Tobago
Nepal
Republic of the Congo
Romania
Turks and Caicos Islands
North Korea
Reunion
Russia
U.S. Virgin Islands
Pakistan
Rwanda
San Marino
United States
Philippines
Saint Helena
Serbia
Singapore
São Tomé and Príncipe
Slovakia
South Korea
Senegal
Slovenia
Sri Lanka
Seychelles
Spain
Taiwan
Sierra Leone
Svalbard and Jan Mayen
Tajikistan
Somalia
Sweden
Thailand
South Africa
Switzerland
Turkmenistan
South Sudan
Ukraine
Uzbekistan
Sudan
United Kingdom
Vietnam
Swaziland
Vatican City
Tanzania
Åland Islands
The Gambia
Togo
Tunisia
Uganda
Western Sahara
Zambia
Zimbabwe