ARDEX G8S Flex 1-6 FLEX JOINT MORTAR

Quick hardening Flex grout. For joint widths of 1 - 6 mm, on walls and floors, indoors and outdoors.

With ARDEX G8S FLEX 1-6, joints with a particularly fine surface and great strength can be produced. ARDEX G8S FLEX 1-6 has, after hardening, water and dirt repellent properties that have a positive effect on the appearance, texture and value retention of the coverings. The high ductility and good flank adhesion cause a stress reduction in thermally stressed surfaces and contribute significantly to the safety of the coverings. As well as the preventive protection against the formation of molds. Despite its rapid hardening, ARDEX G8S FLEX 1-6 is easy to process, does not burn and has a high filling power. ARDEX G8S FLEX 1-6 meets the requirements of CG2 WA according to EN 13888 and is very low emission - EC 1 R PLUS - according to GEV EMICODE.

Product Highlights:

For joint widths of 1-6 mm
Flexible / high strength
Quartz-free - very smooth and fine joint surface
Extensive color spectrum
CG2 WA according to EN 13888

Specification

Technical specifications
bulk weight
approx. 1.30 kg / l
Processing time at + 20 ° C
approx. 30 min
storage
Can be stored in dry rooms for approx. 12 months in the original sealed container.
fresh weight
about 2.00 kg / l
Ball indentation hardness
after 1 day approx. 40.00 N / mm²
after 3 days about 55.00 N / mm²
after 7 days approx. 75.00 N / mm²
after 28 days approx. 80.00 N / mm²
packing
Bag with 5.00 kg net
packed to 4 pieces
52 packing units / pallet
Mixing ratio
approx. 2.75 l water: 12.50 kg ARDEX G8S FLEX 1-6
material requirements
For joint width 3.00 mm , joint depth 5.00 mm
for tiles or medium mosaic
from 60 x 60 cm approx. 0.10 kg / m²
from 60 x 30 cm approx. 0.15 kg / m²
from 30 x 30 cm approx. 0.20 kg / m²
from 15 x 15 cm approx. 0.35 kg / m²
of 10 x 10 cm approx. 0.50 kg / m²
of 5 x 5 cm approx. 1.00 kg / m²
The additional losses due to excess material on the tiles amount to 0.05 - 0.10 kg / m² depending on their surface condition and method of operation .
colour
White
pergamon
silver gray
light gray
sandgrey
Gray
stone gray
cement gray
basalt
anthracite
jasmine
bahamabeige
Sand beige
jura beige
dun
bali brown
dark brown
GISCODE
ZP 1 = cementitious product
EMICODE
EC1

Accessibility at + 20 ° C
after approx. 90 min
underfloor heating fitness
Yes