Elbow switch, activation panel
All models offer same functions: 300, 800, 1200.
Vandal proof with active excessive violence protection
The Prisma Button is protected by durable aluminum and the electronics are sealed with silicone.
An active excessive violence protection means that Prisma Button will not allow an unnecessary amount of violence.
In that case it will shut down to protect the electronics, to make sure the Prisma Button will work for many, many years.
If the Prisma Button would be dented or deformed, it recalibrates and adjusts to function as usual.
With the kick setting turned on, using a DIP-switch, you can be rough while handling the Prisma Button.
Kick, run into or hit it. Prisma Button will send your message to the door automatics.
For strict requirements
Prisma Button is developed to meet the standards of hygiene that can be set in environments such as hospitals.
The smooth surfaces and lack of moving parts prevents collections of dirt and bacteria.
Made of aluminum and polyamide.
Prisma Button contains features that makes life a little bit easier for healthcare staff.
With two relays you get the opportunity to perform a Nurse Bed opening, to open the doors in different ways.
The settings are easily made on site of installation, using dip switches on the push button.
The whole front panel is touch sensitive
The Prisma Button is pressure sensitive on the entire black aluminum front.
Are you missing something that confirms that you pressed the elbow switch? Other than the door opening, of course.
With a dip switch on the inside of your Prisma Button you can simply turn on a notification sound.
Prisma Button will answer with a beep and confirm that the signal has been sent.
Prisma Button is designed to create contrasts in itself.
The silver outer profile and the black pushfront of aluminum makes Prisma Button visible, despite the clean design.
This means you do not need to keep contrasting backgrounds in mind, just design the environment around your push button exactly the way you want.
The contrast between the outer profile and the pushfront has a value of 0.8 NCS and creates accessibility by helping people with impaired vision to find the door opener.
Two different functions
Prisma Button 1200 includes the possibility to set two different functions in the upper and lower part of the elbow switch, due to two different circuit boards.
Vandal proof, active excessive violence protection
Notification sound possible
|57 dBc, 2000 Hz
Extended push settings
|1.5, 3 or 6 seconds
Suitable in healthcare
PTS Forum, Swedish association
Nurse bed settings possible
|Double door control
Settings easily adjusted
|Alternative 1: Top lid with out screw, bottom lid with screw
Alternative 2: Both lids with screws
|Soft front, private label
Push and Hold sticker
Instructions extended push
Circuit Board With double relay
Relay 1: one change over contact
Relay, rated current
Relays max rated current/pole: 2A
Mounting height symbol
Accessibility height from floor: 800 mm
Made in Sweden