Publique sus productos
COMBIMIX
COMBIMIX
COMBIMIX
COMBIMIX
COMBIMIX
COMBIMIX
COMBIMIX
COMBIMIX
COMBIMIX
    IVAR

    COMBIMIX

    Traducido por Google,

    COMBIMIX es una unidad de mezcla y potenciación para instalaciones radiantes. El control de la temperatura de impulsión se lleva a cabo mediante una válvula de dos vías, que regula el flujo de fluido caloportador hacia el sistema de mezcla («inyección»). COMBIMIX está disponible con mezcla de punto fijo mediante cabezal termostático o con mezcla de temperatura exterior compensada mediante servomotor (a integrar con centralita electrónica y sonda de temperatura exterior). Completo con válvula de equilibrado, válvulas de cierre, válvulas automáticas de purga de aire y válvulas de llenado/drenaje, COMBIMIX reúne todas las funciones esenciales en una unidad de tamaño compacto y de fácil acceso. Puede complementarse con kits de colectores IVAR para equilibrar y controlar zonas individuales y, antes de la mezcla, con kits de colectores horizontales o verticales para suministro de alta temperatura a radiadores y toalleros calefactables.

    Especificaciones
    • IVAR COMBI TNB cod. 500454NB-500410NB-500454PE-500410PE: mixing and boosting unit for radiant installations complete with two-way mixing valve, balancing valve (on the cold way), two shut-off ball valves for the pump, two fill/drain valves, two automatic air vent valves, three thermometers 0÷80 °C (on delivery and return of boiler circuit and on delivery of mixed circuit), temperature sensor pocket (on delivery of mixed circuit), shut-off valve (on return of boiler circuit), boiler circuit connections G 1”F (centre distance 200 mm) and mixed circuit connections G 1”M with swivelling nipples (centre distance 200 mm). Upper and lower parts made of nickel-plated CB753S brass; pipe made of nickel-plated half-hard copper; gaskets and O-rings made of peroxide-cured EPDM; other parts made of CW617N brass. Max operating temperature 100 °C. Max operating pressure 10 bar. Fixed point mixing 20÷60 °C by thermostatic control head with remote sensor T5011 included. Max differential pressure at mixing valve ends 250 mbar. Cod. 500454NB pump space 130 mm, G 1”1/2F flat seal connections; cod. 500410NB pump space 180 mm, G 1”1/2F flat seal connections; cod. 500454PE pump space 130 mm, G 1”1/2F flat seal connections, equipped with variable-speed electronic pump WILO4F; cod. 500410PE pump space 180 mm, G 1”1/2F flat seal connections, equipped with variable-speed electronic pump WILO4F-180. Accessories: high-temperature kit with pair of manifolds 1” x EUROK with shut-off and lockshield valves CEP/02 I – CEP/03 I cod. 502105 (2 ways) – 502106 (3 ways), high-temperature kit with pair of simple manifolds 1” x EUROK CEP/02 – CEP/03 cod. 502103 (2 ways) – 502100 (3 ways), insulation shell ACM 01 cod. 506255, threaded spacer for pumps AC 633 cod. 500933 (130 mm) – 500934 (180 mm).

      IVAR COMBI T cod. 500454-500410-500454P-500410P: mixing and boosting unit for radiant installations complete with two-way mixing valve, balancing valve (on the cold way), two shut-off ball valves for the pump, two fill/drain valves, two automatic air vent valves, three thermometers 0÷80 °C (on delivery and return of boiler circuit and on delivery of mixed circuit), temperature sensor pocket (on delivery of mixed circuit), shut-off valve (on return of boiler circuit), boiler circuit connections G 1”F (centre distance 200 mm) and mixed circuit connections G 1”M with swivelling nipples (centre distance 200 mm). Upper and lower parts made of nickel-plated CB753S brass; pipe made of nickel-plated half-hard copper; gaskets and O-rings made of peroxide-cured EPDM; other parts made of CW617N brass. Max operating temperature 100 °C. Max operating pressure 10 bar. Fixed point mixing 20÷60 °C by thermostatic control head with remote sensor T5011 included. Max differential pressure at mixing valve ends 250 mbar. Differential bypass valve 0.2÷0.6 bar with half-hard nickel-plated pipe. Cod. 500454 pump space 130 mm, G 1”1/2F flat seal connections; cod. 500410 pump space 180 mm, G 1”1/2F flat seal connections; cod. 500454P pump space 130 mm, G 1”1/2F flat seal connections, equipped with three-speed standard pump WILO3F; cod. 500410P pump space 180 mm, G 1”1/2F flat seal connections, equipped with three-speed standard pump WILO3F-180. Accessories: high-temperature kit with pair of manifolds 1” x EUROK with shut-off and lockshield valves CEP/02 I – CEP/03 I cod. 502105 (2 ways) – 502106 (3 ways), high-temperature kit with pair of simple manifolds 1” x EUROK CEP/02 – CEP/03 cod. 502103 (2 ways) – 502100 (3 ways), insulation shell ACM 01 cod. 506255, threaded spacer for pumps AC 633 cod. 500933 (130 mm) – 500934 (180 mm).

      IVAR COMBI MNB cod. 501728NB-501729NB-501728PE-501729PE: mixing and boosting unit for radiant installations complete with two-way mixing valve, balancing valve (on the cold way), two shut-off ball valves for the pump, two fill/drain valves, two automatic air vent valves, three thermometers 0÷80 °C (on delivery and return of boiler circuit and on delivery of mixed circuit), temperature sensor pocket (on delivery of mixed circuit), shut-off valve (on return of boiler circuit), boiler circuit connections G 1”F (centre distance 200 mm) and mixed circuit connections G 1”M with swivelling nipples (centre distance 200 mm). Upper and lower parts made of nickel-plated CB753S brass; pipe made of nickel-plated half-hard copper; gaskets and O-rings made of peroxide-cured EPDM; other parts made of CW617N brass. Max operating temperature 100 °C. Max operating pressure 10 bar. Set up for outside compensated temperature mixing by integrating axial servomotor IVAR RV 01 or thermoelectric actuator IVAR TE 3061. Cod. 501728NB pump space 130 mm, G 1”1/2F flat seal connections; cod. 501729NB pump space 180 mm, G 1”1/2F flat seal connections; cod. 501728PE pump space 130 mm, G 1”1/2F flat seal connections, equipped with variable-speed electronic pump WILO4F; cod. 501729PE pump space 180 mm, G 1”1/2F flat seal connections, equipped with variable-speed electronic pump WILO4F-180. Accessories: high-temperature kit with pair of manifolds 1” x EUROK with shut-off and lockshield valves CEP/02 I – CEP/03 I cod. 502105 (2 ways) – 502106 (3 ways), high-temperature kit with pair of simple manifolds 1” x EUROK CEP/02 – CEP/03 cod. 502103 (2 ways) – 502100 (3 ways), insulation shell ACM 01 cod. 506255, threaded spacer for pumps AC 633 cod. 500933 (130 mm) – 500934 (180 mm).

      IVAR COMBI M cod. 501728-501729-501728P-501729P: mixing and boosting unit for radiant installations complete with two-way mixing valve, balancing valve (on the cold way), two shut-off ball valves for the pump, two fill/drain valves, two automatic air vent valves, three thermometers 0÷80 °C (on delivery and return of boiler circuit and on delivery of mixed circuit), temperature sensor pocket (on delivery of mixed circuit), shut-off valve (on return of boiler circuit), boiler circuit connections G 1”F (centre distance 200 mm) and mixed circuit connections G 1”M with swivelling nipples (centre distance 200 mm). Upper and lower parts made of nickel-plated CB753S brass; pipe made of nickel-plated half-hard copper; gaskets and O-rings made of peroxide-cured EPDM; other parts made of CW617N brass. Max operating temperature 100 °C. Max operating pressure 10 bar. Set up for outside compensated temperature mixing by integrating axial servomotor IVAR RV 01 or thermoelectric actuator IVAR TE 3061. Differential bypass valve 0.2÷0.6 bar with half-hard nickel-plated pipe. Cod. 501728 pump space 130 mm, G 1”1/2F flat seal connections; cod. 501729 pump space 180 mm, G 1”1/2F flat seal connections; cod. 501728P pump space 130 mm, G 1”1/2F flat seal connections, equipped with three-speed standard pump WILO3F; cod. 501729P pump space 180 mm, G 1”1/2F flat seal connections, equipped with three-speed standard pump WILO3F-180. Accessories: high-temperature kit with pair of manifolds 1” x EUROK with shut-off and lockshield valves CEP/02 I – CEP/03 I cod. 502105 (2 ways) – 502106 (3 ways), high-temperature kit with pair of simple manifolds 1” x EUROK CEP/02 – CEP/03 cod. 502103 (2 ways) – 502100 (3 ways), insulation shell ACM 01 cod. 506255, threaded spacer for pumps AC 633 cod. 500933 (130 mm) – 500934 (180 mm).

    Especificaciones técnicas
    • ReferenciaCOMBIMIX
    • Familia de productoRadiant systems
    • Grupo de productosMixing and relaunch group for radiant systems COMBIMIX
    • TipoObjeto (objeto simple)
    • Día de publicación2019-02-01
    • Número de edición1
    Información relacionada
    • Material principalBronce
    • Material secundarioCobre
    • Diseñado enItalia
    • Fabricado enItalia
    Clasificación
    • Categoría BIMobjectFontanería - Fontanería - Otros
    • Clasificación IFC Válvula
    • Nombre UNSPSCValves
    • Código UNSPSC401416
    • Código Uniclass 2015Ss_60
    • Descripción Uniclass 2015Heating, cooling and refrigeration systems
    • CSI MasterFormat 2014 Code23 00 00
    • CSI MasterFormat 2014 TítuloHeating, Ventilating, and Air Conditioning (HVAC)
    • Número OmniClass23-27 31 00
    • Título OmniClass Valves
    • CSI UniFormat II CódigoD30
    • CSI UniFormat II TítuloHVAC

    Disponibilidad en regiones

    Europa Asia Norteamérica África Sudamerica Oceanía
    Åland
    Afganistán
    Anguilla
    Angola
    Argentina
    Australia
    Albania
    Arabia Saudí
    Antigua y Barbuda
    Argelia
    Bolivia
    Estados Federados de Micronesia
    Alemania
    Armenia
    Aruba
    Benín
    Brasil
    Fiyi
    Andorra
    Azerbaiyán
    Bahamas
    Botsuana
    Chile
    Guam
    Austria
    Bangladesh
    Barbados
    Burkina Faso
    Colombia
    Isla Norfolk
    Bélgica
    Baréin
    Belice
    Burundi
    Ecuador
    Islas Cook
    Bielorrusia
    Brunéi
    Bermudas
    Cabo Verde
    Guayana Francesa
    Islas Marianas del Norte
    Bosnia-Herzegovina
    Bután
    Canadá
    Camerún
    Guyana
    Islas Marshall
    Bulgaria
    Camboya
    Caribe Neerlandés
    Chad
    Islas Malvinas (Falkland Islands)
    Islas Pitcairn
    Chipre
    Catar
    Costa Rica
    Comoras
    Paraguay
    Islas Salomón
    Ciudad del Vaticano
    China
    Cuba
    Congo
    Perú
    Islas Ultramarinas Menores de Estados Unidos
    Croacia
    Corea del Norte
    Curazao
    Costa de Marfil
    Surinam
    Kiribati
    Dinamarca
    Corea del Sur
    Dominica
    Djibuti
    Uruguay
    Nauru
    Eslovaquia
    Emiratos Árabes Unidos
    El Salvador
    Egipto
    Venezuela
    Niue
    Eslovenia
    Filipinas
    Estados Unidos
    Eritrea
    Nueva Caledonia
    España
    Georgia
    Granada
    Esuatini
    Nueva Zelanda
    Estonia
    Hong Kong
    Groenlandia
    Etiopía
    Palaos
    Finlandia
    India
    Guadalupe
    Gabón
    Papúa Nueva Guinea
    Francia
    Indonesia
    Guatemala
    Gambia
    Polinesia Francesa
    Gibraltar
    Irak
    Haití
    Ghana
    Samoa
    Grecia
    Irán
    Honduras
    Guinea
    Samoa Americana
    Guernsey
    Isla de Navidad
    Islas Caimán
    Guinea Ecuatorial
    Timor Oriental
    Hungría
    Islas Cocos (Keeling)
    Islas Turcas y Caicos
    Guinea-Bissau
    Tokelau
    Irlanda
    Israel
    Islas Vírgenes Británicas
    Kenia
    Tonga
    Isla de Man
    Japón
    Islas Vírgenes de los Estados Unidos
    Lesoto
    Tuvalu
    Islandia
    Jordania
    Jamaica
    Liberia
    Vanuatu
    Islas Faroe
    Kazajistán
    Martinica
    Libia
    Wallis eta Futuna
    Italia
    Kirguistán
    México
    Madagascar
    Jersey
    Kuwait
    Montserrat
    Malaui
    Letonia
    Laos
    Nicaragua
    Malí
    Liechtenstein
    Líbano
    Panamá
    Marruecos
    Lituania
    Macao
    Puerto Rico
    Mauricio
    Luxemburgo
    Malasia
    República Dominicana
    Mauritania
    Macedonia del Norte
    Maldivas
    Saint Barthélemy
    Mayotte
    Malta
    Mongolia
    San Cristóbal y Nieves
    Mozambique
    Moldavia
    Myanmar (Birmania)
    San Martín
    Namibia
    Mónaco
    Nepal
    San Pedro y Miquelón
    Níger
    Montenegro
    Omán
    San Vicente y las Granadinas
    Nigeria
    Noruega
    Pakistán
    Santa Lucía
    República Centroafricana
    Países Bajos
    Palestina
    Sint Maarten
    República Democrática del Congo
    Polonia
    Singapur
    Trinidad y Tobago
    Reunión
    Portugal
    Siria
    Ruanda
    Reino Unido
    Sri Lanka
    Sahara Occidental
    República Checa
    Tailandia
    Santa Elena
    Rumanía
    Taiwán
    Santo Tomé y Príncipe
    Rusia
    Tayikistán
    Senegal
    San Marino
    Territorio Británico del Océano Índico
    Seychelles
    Serbia
    Turkmenistán
    Sierra Leona
    Suecia
    Turquía
    Somalia
    Suiza
    Uzbekistán
    Sudáfrica
    Svalbard y Jan Mayen
    Vietnam
    Sudán
    Ucrania
    Yemen
    Sudán del Sur
    Tanzania
    Togo
    Túnez
    Uganda
    Zambia
    Zimbabue
    Common.Footer.ValueProp.Image.AltText

    Aplicación de diseño para Revit

    Cargue familias directamente en su modelo de Revit con un solo clic

    Obtenga un lugar para acceder a nuevos objetos más fácilmente, almacene sus familias de Revit y colabore con su equipo.

    • Marca de verificaciónTrabaje directamente con los objetos BIM junto a Revit
    • Marca de verificación 2GB de almacenamiento en la nube: almacene su contenido de Revit
    • Marca de verificación Obtenga el LCA de carbono incorporado (A1-A3) directamente desde Revit