Julkaise tuotteesi
GPS time receiver
ABB

GPS time receiver

For the reception and processing of the GPS signal, as well as for brightness and temperature measurement. The sensor measures the brightness and outside temperature and sends them on the KNX bus. Likewise the time, date and geographical coordinates are send to the KNX bus. Additionally the sunrise and sunset times are also send to the bus. With integrated Bus Coupler.

Tekniset tiedot
  • The Time Receiver GPS is a surface mounted device. Physical address assignment and device parameterization are carried out using ETS and the current application.
    The TR/A 1.1 is powered via the ABB i-bus® and does not require an additional auxiliary voltage supply.  The device is ready for operation after connecting the bus voltage.
    The Time Receiver GPS is used to receive the current time and to send it on the KNX bus. This allows the Time Receiver GPS to act as the internal clock for every time switch or also for devices with timedependent logic. Furthermore, its integrated brightness and temperature sensor can transmit additional exterior conditions on the KNX bus

Tekniset tiedot
  • Yksilöity viiteGPS-time-receiver
  • TuoteperheTime Switcher
  • TuoteryhmäAutomation, Logic and Time Control
  • TyyppiObjekti (yksittäinen objekti)
  • Julkaisupäivä2020-12-21
  • Painoksen numero1
  • Korkeus (mm)40
  • Leveys (mm)89.5
  • Syvyys (mm)75
Liittyviä
  • Ensisijainen materiaaliMuovi
  • Toissijainen materiaaliMetalli
Luokitus
  • BIMobject-luokkaSähköosat - Controls
  • Uniclass 2015 -koodiPr_75_50_76_03
  • Uniclass 2015 -kuvausAir temperature sensors
  • CSI MasterFormat 2014 -koodi26 22 19
  • CSI MasterFormat 2014 -nimikeControl and Signal Transformers
  • OmniClass-numero23-37 17 13
  • OmniClass-nimikeSignal Devices
Common.Footer.ValueProp.Image.AltText

Design App for Revit

Lataa perheet suoraan Revit-malliisi yhdellä napsautuksella

Hanki paikka, jossa voit käyttää uusia objekteja helpommin, tallentaa Revit-perheesi ja tehdä yhteistyötä tiimisi kanssa.

  • ValintamerkkiTyöskentele suoraan BIM-objektien kanssa Revitin vieressä
  • Valintamerkki 2 Gt pilvitallennustilaa – tallenna Revit-sisältösi
  • Valintamerkki Hanki sisällysluettelon hiilijalanjälkilaskenta (A1–A3) suoraan Revitistä