PANDOMO MW Binder Matrix

For the production of cement-based, quickly usable, designable floor coverings in composite.
Binder matrix available in white and black.
Walkable after 8 hours.
Sandable after 24 hours.
For layer thicknesses from 11 mm.
For indoor use.
With optimized processing properties.
Non-combustible.

Self-levelling
Processing time 30 minutes
Low shrinkage
Quick sanding
Quickly loadable
Range of application
Creation of representative, creatively designed visible and useful surfaces with quick accessibility and early initial strength in combination.

Tekniset tiedot

Mixing ratio: about 4.5-5 l of water is added 25 kg of binding matrix PANDOMO MW or MB Terrazzo Micro and 25 kg of small decorative stones PANDOMO TG (water consumption may vary slightly depending on the stones used)
Bulk weight of the mixture: approx. 1.2 kg / l
Wet weight of the solution: approx. 2.2 kg / l
Material Consumption: approx. 10 kg / m2 / cm
Processing time (20 ° C) *: approx. 30 minutes.
Pedestrian load ready (20 ° C) *: after about 8 hours
Drying: after about 24 hours (if necessary, protect the floor from premature drying with plastic wrap)
Compressive strength*:
after 1 day - approx. 30 N / mm2
after 7 days, approx. 40 N / mm2
after 28 days, approx. 45 N / mm2
Bending Strength *:
after 1 day - approx. 4 N / mm2
after 7 days - approx. 4.5 N / mm2
after 28 days - approx. 5 N / mm2
Fire rating: A1 - according to EN 13501
Wear resistance: A9 (according to EN 13892, part 3, Boehme wear / resistance class)
Use on underfloor heating: yes
Labeling according to GefStoffV (Hazardous Materials Handling Rules): Xi - is irritating
Marking according to GGVS / ADR (Rules for the transport of dangerous goods by road / ADR): no
Packaging: 25 kg net bags
Storage: approx. 6 months in dry rooms, in the original unopened packaging