InsulBase Polyiso Insulation

InsulBase is a rigid-roof insulation panel composed of a closed-cell polyisocyanurate foam core bonded on each side to glass-reinforced felt (GRF). ReadyFlash® Technology is a standard feature of InsulBase Polyiso that allows the contractor to manipulate flash-off times by choosing which side of the insulation board to apply membrane adhesives. ReadyFlash features a dark glass-reinforced felt (GRF) on one side of the insulation board and a light glass-reinforced felt on the other.

Increases surface temperature of the dark facer up to 25ºF above ambient temperature and provides up to 30% faster adhesive flash-off.
Decreases surface temperature of the light facer up to 5ºF below ambient temperature.

Features and Benefits

InsulBase polyiso insulation provides the highest R-value per inch of commercially available insulation products
Zero ozone-depleting components, HFC- and HCFC-free formulation
Approved for direct application to steel decks

Tekniset tiedot

Panel Characteristics
- Available in 4' x 4' (1220 mm x 1220 mm) and 4' x 8' (1220 mm x 2440 mm) panels in thickness of ½" (13 mm) to 4.5" (115 mm)
- Available in 4' x 12' (1220 mm x 3660 mm) panels in the following thickness: 1.5", 1.75", 2.0", 2.2", 2.5", 2.6", 3.0", 3.3", and 3.5"Applications
- Single-Ply Roof Systems (Ballasted, Mechanically Attached, Fully Adhered)
Codes and Compliances
- ASTM C1289, Type II, Class 1, Grade 2 (20 psi), Grade 3 (25 psi)
- International Building Code (IBC) Section 2603»UL Standard 790, 263 and 1256: Component of Class A Roof Systems (refer to UL Roof Materials’ system directory)
- FM Standards 4450/4470: Class 1 approval for steel roof-deck constructions (refer to FM RoofNavSM)»California Code of Regulations, Title 24, Insulation Quality Standard License #TI-1418
- Third-party certification with the PIMA Quality Mark for Long-Term Thermal Resistance (LTTR) values
- CAN/ULC S704, Type 2, Class 3 (20PSI), Type 3, Class 3 (25PSI)
- Florida Building Code Approval»CDPH compliant for maximum allowable concentrations of target VOCs
Carlisle SynTec Systems’ focus has always been innovation – Innovation to solve problems, improve performance, reduce labor, and above all, improve sustainability. Carlisle is committed to driving sustainable and efficient processes in the design and manufacturing of our products.
- Zero ozone-depleting components, HFC- and HCFC-free formulation»CDPH Compliant for maximum allowable concentrations of target VOCs
- Up to 56.9% recycled content by weight (36.6% post-consumer/20.3% pre-consumer)
- Contributes to LEED® and Green Globes certification requirements
- End-of-life jobsite disposal options available for re-use/re-purposing
- Carlisle Polyiso Roof Insulation and HD Cover Board EPDs available
- PIMA Quality MarkCM Certification Program participant for Long-Term Thermal R-values (LTTR)»Highest R-value per inch providing maximum energy savings and CO2emissions avoidance
Polyiso Eco Ready (Optional)
- 5% bio-content option available (for 2.0" and 2.6" thicknesses)
- Contributes to carbon reduction initiatives via mass balance approach under ISCC PLUS compliance

Tekniset tiedot

Yksilöity viiteinsulbase-polyiso-insulation
TuoteperheRoofing-Products
TuoteryhmäInsulation
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2026-08-27
Painoksen numero1

Linkit

Liittyviä

Ensisijainen materiaaliPolyisosyanuraatti PIR

Luokitus

BIMobject-luokkaRakennusmateriaalit - Eristys
IFC-luokitusKatto
ETIM-koodiEC000406
ETIM-nimiThermal insulation
Uniclass 2015 -koodiPr_25_31_28_65
Uniclass 2015 -kuvausPolyisocyanurate (PIR) foam insulation
CSI MasterFormat 2014 -koodi07 21 13.13
CSI MasterFormat 2014 -nimikeFoam Board Insulation
OmniClass-numero23-13 25 19 11
OmniClass-nimikeSlab and Board Thermal Insulation

Alueellinen saatavuus

Pohjois-Amerikka
Anguilla
Antigua ja Barbuda
Aruba
Bahamasaaret
Barbados
Belize
Bermuda
Brittiläiset Neitsytsaaret
Caribbean Netherlands
Caymansaaret
Costa Rica
Curaçao
Dominica
Dominikaaninen tasavalta
El Salvador
Grenada
Grönlanti
Guadeloupe
Guatemala
Haiti
Honduras
Jamaika
Kanada
Kuuba
Martinique
Meksiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts ja Nevis
Saint Lucia
Saint Vincent ja Grenadiinit
Saint-Barthélemy
Saint-Martin
Saint-Pierre ja Miquelon
Sint Maarten
Trinidad ja Tobago
Turks- ja Caicossaaret
Yhdysvallat
Yhdysvaltain Neitsytsaaret