Hybrid kitchen fitting for hot water heater F5LME002

F5LME hybrid kitchen fitting DN 15 as pillar mixer with swivelling spout, can be locked in the centre position. Adjustable swivel ranges of 50°, 120° and 360°. To the connection via hoses in open undercounter boilers. Single lever mixer with mixer cartridge with ceramic disc technology and adjustable, turn-proof temperature stop. Alternative activation using hand reflection via an opto-electronic sensor for time-controlled water release with preset mixing water temperature. Mixer cartridge, solenoid valve and sensor with control electronics in all-metal housing, brushed stainless steel. With beam shaper. Projection 220 mm. Activated water hygiene flushing 24 hours after last activation, safety switch-off for continuous reflection and saving of statistical data. With option for parametrisation and communication via optional, bidirectional remote control. Optionally for battery operation with battery compartment including 6 V lithium battery (CR-P2) per fitting for installation under the kitchen sink or for separate power supply via 6.75 V/12 V DC power supply unit or AQUA 3000 open system accessories. Battery compartment including battery or power supply unit with extension cable must be ordered separately.

Tekniset tiedot

Depressurised	yes
With filter	yes
Functional principle	manual
Hygiene flushing	prepared
Diameter nominal	DN 15
Locking mechanism	Top section, non-ceramic
Material fitting	stainless steel
Minimum flow pressure	1 bar
Type of mixing	yes
Pop-up waste set	no
With rosettes/cover plate	no
Spout	rotating, top
Spout projection	220 mm
Surface finish fitting	brushed
Temperature limit	yes
Thermal disinfection	yes
Type of mounting	tap hole
Type of operation	manual operation
Type of tap	pillar tap
Volume flow rate at 3 bar	0.08 l/s
Water connection	hose (gland nut)
Accent colour	none
Power supply connection	6,75 / 12 V DC / A3000 open
Power consumption	1.5 Voltampere
Protective system IP	59K

Tekniset tiedot

Yksilöity viite2030061065
TuoteperheTaps
TuoteryhmäManual taps
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2024-09-10
Painoksen numero1
Korkeus (mm)392

Linkit

Liittyviä

Ensisijainen materiaaliRuostumaton teräs
Suunniteltu:Saksa
Valmistettu:Saksa
Nettopaino (kg)3.8

Luokitus

BIMobject-luokkaKeittiö - Hanat ja sekoittajat
Uniclass 2015 -koodiPr_40_20_87_84
Uniclass 2015 -kuvausSink taps

Alueellinen saatavuus

Aasia	Eurooppa	Oseania	Pohjois-Amerikka	Afrikka
Arabiemiirikunnat	Alankomaat	Australia	Kanada	Etelä-Afrikka
	Belgia		Yhdysvallat
	Espanja
	Irlanti
	Italia
	Itävalta
	Kroatia
	Latvia
	Liettua
	Luxemburg
	Puola
	Ranska
	Romania
	Ruotsi
	Saksa
	Serbia
	Slovakia
	Slovenia
	Suomi
	Sveitsi
	Tsekin tasavalta
	Ukraina
	Unkari
	Venäjä
	Viro
	Yhdistynyt kuningaskunta