Julkaise tuotteesi
Ashby Ceiling Loudspeakers

Ashby Ceiling Loudspeakers

The Ashby’s dual-driver concentric configuration offers accuracy and fidelity over a full range: Experience it all, from crystal-clear speech to music’s sparkling highs and rich bass.

Features & Benefits

  • Self-powered
  • Easy to install
  • Extremely wide and consistent coverage
  • Ultra low distortion
  • Exceptional SPL-to-size ratio
  • Beautiful low frequency response and reproduction of speech and music
  • Supports long cable runs with light-gauge cablesOne MPS-488HP can power up to 16 Ashby-8Cs

Applications

  • Distributed systems for music and paging that demand high-quality audio and vocal intelligibility
  • Constellation acoustic systems
Tekniset tiedot
  • Ceiling Loudspeaker: Ashby 5C

    The loudspeaker shall be self-powered and include one 5-in (127 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 5-in driver.

    Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 100 Hz - 18 kHz; phase response, 290 Hz – 16 kHz ±45° and a conical coverage of 110 degrees. The loudspeaker shall be capable of maximum linear peak SPL of 112 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.

    The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The loudspeaker shall have looping capabilities, and when connected to one channel of the required power supply up to three units can be powered. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.

    The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.32 A with a duration of less than 3 s.

    The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 450 ft with 18 AWG (135 m with 1.0 mm) and the maximum cable run for three looped units is 150 ft with 18 AWG (45 m with 1.0 mm).

    Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 7.17 in (182 mm). Grille shall be made of perforated steel and its diameter shall be 9.34 in (237.3 mm).

    Dimensions shall be 8.92 in (226.5 mm) in diameter and 7.17 in (182 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 7.60 - 7.875 in (193 - 200 mm). Weight shall be 7.8 lb (3.53 kg).

    The loudspeaker shall be the Meyer Sound Ashby-5C

    Ceiling Loudspeaker: Ashby 8C
    The loudspeaker shall be self-powered and include one 8-in (203.2 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 8-in driver.

    Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 60 Hz - 18 kHz; phase response, 190 Hz – 16 kHz ±45° and a conical coverage of 100 degrees.

    The loudspeaker shall be capable of maximum linear peak SPL of 114 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.

    The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.

    The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.78 A with a duration of less than 3 s.

    The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 300 ft with 18 AWG (90 m with 1.0 mm) and the maximum cable run for two looped units is 150 ft with 18 AWG (45 m with 1.0 mm).

    Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate also 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 8.87 in (225.3 mm). Grille shall be made of perforated steel and its diameter shall be 12.97 in (329.3 mm).

    Dimensions shall be 12.64 in (321 mm) in diameter and 8.87 in (225.3 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 11.32 - 11.75 in (287.6 - 298.4 mm). Weight shall be 13.8 lb (6.26 kg).

    The loudspeaker shall be the Meyer Sound Ashby-8C. 

    Keyword: Loudspeaker, Loudspeakers, Ceiling Loudspeaker, Ceiling Loudspeakers

Tekniset tiedot
  • Yksilöity viitemeyersound-ashby
  • TuoteperheLoudspeakers
  • TuoteryhmäULTRA
  • TyyppiObjekti (yksittäinen objekti)
  • Julkaisupäivä2020-03-12
  • Painoksen numero2
Liittyviä
  • Ensisijainen materiaaliAlumiini
  • Suunniteltu:Yhdysvallat
  • Valmistettu:Yhdysvallat
Luokitus
  • BIMobject-luokkaElektroniikka - Audioelektroniikka
  • IFC-luokitusObjekti
  • Uniclass 2015 -koodiPr_70_75_36_50
  • Uniclass 2015 -kuvausLoudspeakers
  • CSI MasterFormat 2014 -koodi27 24 23
  • CSI MasterFormat 2014 -nimikeAudio-Video Devices
  • OmniClass-numero23-37 15 29 11 13
  • OmniClass-nimikeLoudspeakers

Alueellinen saatavuus

Eurooppa Aasia Pohjois-Amerikka Afrikka Etelä-Amerikka Oseania
Ahvenanmaa
Afganistan
Anguilla
Algeria
Argentiina
Amerikan Samoa
Alankomaat
Arabiemiirikunnat
Antigua ja Barbuda
Angola
Bolivia
Australia
Albania
Armenia
Aruba
Benin
Brasilia
Cooksaaret
Andorra
Azerbaidžan
Bahamasaaret
Botswana
Chile
Fidzi
Belgia
Bahrain
Barbados
Burkina Faso
Ecuador
Guam
Bosnia ja Hertsegovina
Bangladesh
Belize
Burundi
Falklandinsaaret (Malvinassaaret)
Kiribati
Bulgaria
Bhutan
Bermuda
Djibouti
Guyana
Marshallsaaret
Espanja
Brittiläinen Intian valtameren alue
Brittiläiset Neitsytsaaret
Egypti
Kolumbia
Mikronesian liittovaltio
Färsaaret
Brunei
Caribbean Netherlands
Eritrea
Paraguay
Nauru
Gibraltar
Etelä-Korea
Caymansaaret
Etelä-Afrikka
Peru
Niue
Guernsey
Filippiinit
Costa Rica
Etelä-Sudan
Ranskan Guayana
Norfolkinsaari
Huippuvuoret
Georgia
Curaçao
Etiopia
Surinam
Palau
Irlanti
Hong Kong
Dominica
Gabon
Uruguay
Papua-Uusi-Guinea
Islanti
Indonesia
Dominikaaninen tasavalta
Gambia
Venezuela
Pitcairnsaaret
Italia
Intia
El Salvador
Ghana
Pohjois-Mariaanit
Itävalta
Israel
Grenada
Guinea
Ranskan Polynesia
Jersey
Japani
Grönlanti
Guinea-Bissau
Salomonsaaret
Kreikka
Jemen
Guadeloupe
Kamerun
Samoa
Kroatia
Jordania
Guatemala
Kap Verde
Timor-Leste
Kypros
Joulusaari
Haiti
Kenia
Tokelau
Latvia
Kambodža
Honduras
Keski-Afrikan tasavalta
Tonga
Liechtenstein
Kazakstan
Jamaika
Komorit
Tuvalu
Liettua
Kiina
Kanada
Kongo
United States Minor Outlying Islands
Luxemburg
Kirgisia
Kuuba
Kongon demokraattinen tasavalta
Uusi-Kaledonia
Malta
Kookossaaret
Martinique
Länsi-Sahara
Uusi-Seelanti
Mansaari
Kuwait
Meksiko
Lesotho
Vanuatu
Moldova
Laos
Montserrat
Liberia
Wallis ja Futuna
Monaco
Libanon
Nicaragua
Libya
Montenegro
Macao
Panama
Madagaskar
Norja
Malediivit
Puerto Rico
Malawi
Pohjois-Makedonia
Malesia
Saint Kitts ja Nevis
Mali
Portugali
Mongolia
Saint Lucia
Marokko
Puola
Myanmar (Burma)
Saint Vincent ja Grenadiinit
Mauritania
Ranska
Nepal
Saint-Barthélemy
Mauritius
Romania
Oman
Saint-Martin
Mayotte
Ruotsi
Pakistan
Saint-Pierre ja Miquelon
Mosambik
Saksa
Palestiinalaisalueet
Sint Maarten
Namibia
San Marino
Pohjois-Korea
Trinidad ja Tobago
Niger
Serbia
Qatar
Turks- ja Caicossaaret
Nigeria
Slovakia
Saudi-Arabia
Yhdysvallat
Norsunluurannikko
Slovenia
Singapore
Yhdysvaltain Neitsytsaaret
Päiväntasaajan Guinea
Suomi
Sri Lanka
Reunion
Sveitsi
Syyria
Ruanda
Tanska
Tadžikistan
Saint Helena
Tsekin tasavalta
Taiwan
Sambia
Ukraina
Thaimaa
São Tomé ja Príncipe
Unkari
Turkki
Senegal
Valko-Venäjä
Turkmenistan
Seychellit
Vatikaanivaltio
Uzbekistan
Sierra Leone
Venäjä
Vietnam
Somalia
Viro
Sudan
Yhdistynyt kuningaskunta
Swasimaa
Tansania
Togo
Tsad
Tunisia
Uganda
Zimbabwe