Julkaise tuotteesi
MI-G Grease Interceptor
MIFAB

MI-G Grease Interceptor

MIFAB MI-G Series sanitary, acid-resistant, powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor. Unit shall include: removable baffle assembly and cross bar, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), external vented flow control fitting, internal air relief by pass, feet underneath interceptor to elevate it ½” off the ground, and steel acid resistant, powder epoxy coated, non skid, rectangular gasketed lid(s). Interceptor shall be tested and certified to the P.D.I. Standard PDI-G101 and A.S.M.E. A112.14.3 and be so marked.
Tekniset tiedot
  • SKUs: MI-G-0, MI-G-1, MI-G-2, MI-G-3, MI-G-4, MI-G-5, MI-G-6, MI-G-7
Tekniset tiedot
  • Yksilöity viitemi-g-1-grease-interceptor
  • TuoteperheInterceptors
  • TuoteryhmäGrease Interceptors
  • TyyppiObjekti (yksittäinen objekti)
  • Julkaisupäivä2021-02-26
  • Painoksen numero1
Liittyviä
  • Suunniteltu:Yhdysvallat
  • Valmistettu:Yhdysvallat
Luokitus
  • BIMobject-luokkaPutkityöt - Putkisto
  • UNSPSC-nimiSludge collectors
  • UNSPSC-koodi47101536
  • Uniclass 2015 -koodiPr_65_52_25_06
  • Uniclass 2015 -kuvausBelow-ground grease traps and converters
  • CSI MasterFormat 2014 -koodi46 25 23
  • CSI MasterFormat 2014 -nimikeGrease Traps
  • OmniClass-numero23-39 33 17
  • OmniClass-nimikeOil and Grease Separation and Removal Equipment
  • CSI UniFormat II -koodiD20
  • CSI UniFormat II -nimikePLUMBING

Alueellinen saatavuus

Pohjois-Amerikka
Yhdysvallat
Common.Footer.ValueProp.Image.AltText

Design App for Revit

Lataa perheet suoraan Revit-malliisi yhdellä napsautuksella

Hanki paikka, jossa voit käyttää uusia objekteja helpommin, tallentaa Revit-perheesi ja tehdä yhteistyötä tiimisi kanssa.

  • ValintamerkkiTyöskentele suoraan BIM-objektien kanssa Revitin vieressä
  • Valintamerkki 2 Gt pilvitallennustilaa – tallenna Revit-sisältösi
  • Valintamerkki Hanki sisällysluettelon hiilijalanjälkilaskenta (A1–A3) suoraan Revitistä