Torin™ Commercial Air-to-Water Heat Pump Water Heater

Torin™ Commercial Air-to-Water Heat Pump Water Heater

Engineered to Endure. Trusted to Perform.

Built to meet today’s commercial hot water demands, TorinTM delivers high efficiency, sustainable
performance, and dependable cold‑climate operation—paired with a space‑saving design well suited
for tight mechanical rooms and retrofit applications. As the only solution in its class proven to deliver hot
water at lower ambient temperatures, TorinTM gives businesses confidence their hot water needs will be
met, wherever reliability matters most.

Key Benefits

Performs in extreme conditions—operates efficiently in ambient temperatures as low as -13°F (-25°C).
Achieves COP up to 4.5, reducing energy costs significantly.
Energy Star® Certified for compliance and rebates.
Its compact design delivers a leading footprint—on average 36% smaller than major competitors. (Based on overall unit footprint compared to the average of comparable models using published specifications.
Sky-35 touchscreen interface for easy setup and monitoring. Simplifying operation for installers and facility operators.
Indoor/outdoor ready with single or Multipass piping options to fit a wide range of system designs.
Cascade up to 16 units for redundancy and higher capacity.
Engineered for a wide range of applications — this system delivers reliable domestic hot water and space heating.

Ideal Applications

Hotels & Hospitality - High Demand
Schools & Universities - Campus Wide
Government & Office Buildings - Energy-focused
Multifamily Housing - Retrofit-Ready

Tekniset tiedot

Raypak Model — RMHPHDA068VD000
- Electrical Input:
  - Voltage/Phase: 480V / 3 Phase / 60Hz
  - Full Load: 25A
  - MCA: 33.5A
  - Overcurrent protection device size: 40A
  - Refrigerant: R454b
  - Heating Capacity: 68,000 BTU/hr*
  - Power Input: 4.9 kW
  - COP*: 4.5
  - Noise Level: 75 dBa @ 10ft
  - Rated Load Amps @ DOE Conditions: 8.5A
- Technical Data:
  - Compressor — Type: Inverter | Number Per Unit: 1 | FLA: 25 | Pole/RPM: 6P/7200
  - Fan — Type: Axial | Number Per Unit: 1 | FLA: 2.5 | Pole/RPM: 2/1100 | Air Flow: 6000 CFM
  - Max Static Pressure for Ducting: 0.15" W.C.
  - Heat Exchanger (Water Side):
  - Type of Water Tube: Double Wall - 316L Stainless Steel
  - Design: Counter Flow Brazed Plate
  - Flow Rate Excl. By Pass: 5–15 gpm
  - Max Outlet Water Temp: 150°F
  - Design Pressure Drop: 4.5 PSI
  - Max Operating Pressure**: 65 PSI
- General Information:
  - Water Connections: 1" Copper
  - Drain: 1 1/4 socket connection
  - Defrost: Hot Gas Injection
  - Cabinet Construction: 18 Gauge painted commercial steel outdoor specs
  - Approx. Shipping Weight: (not shown in this column — value cut off in screenshot)
  - Size L x W x H: 40" x 40" x 42"
Raypak Model — RMHPHDA120VD000
- Electrical Input:
  - Voltage/Phase: 480V / 3 Phase / 60Hz
  - Full Load: 34A
  - MCA: 44.8A
  - Overcurrent protection device size: 50A
  - Refrigerant: R454b
  - Heating Capacity: 120,000 BTU/hr*
  - Power Input: 9.8 kW
  - COP*: 4.5
  - Noise Level: 75 dBa @ 10ft
  - Rated Load Amps @ DOE Conditions: 12.5A
- Technical Data:
  - Compressor — Type: Inverter | Number Per Unit: 1 | FLA: 34 | Pole/RPM: 6P/7200
  - Fan — Type: Axial | Number Per Unit: 1 | FLA: 2.5 | Pole/RPM: 2/1100 | Air Flow: 6000 CFM
  - Max Static Pressure for Ducting: 0.15" W.C.
  - Heat Exchanger (Water Side):
  - Type of Water Tube: Double Wall - 316L Stainless Steel
  - Design: Counter Flow Brazed Plate
  - Flow Rate Excl. By Pass: 5–20 gpm
  - Max Outlet Water Temp: 150°F
  - Design Pressure Drop: 2.5 PSI
  - Max Operating Pressure**: 65 PSI
- General Information:
  - Water Connections: 1" Copper
  - Drain: 1 1/4 socket connection
  - Defrost: Hot Gas Injection
  - Cabinet Construction: 18 Gauge painted commercial steel outdoor specs
  - Approx. Shipping Weight: 483 lbs
  - Size L x W x H: 40" x 40" x 58"