Play Wall Type 01 | Playground Equipment | Climbing Wall

Technical information

Equipment made of natural mountain larch

Core-free
Sawn-timbers core-free, thus decreasing occurrences of cracking and undesired changes in shape

Tongue and groove
Tongue and groove planks made of 4 cm solid wood, highly resilient, no trickling of dust / sand, protection against direct rain

Hardwood rungs
Climbing rungs made of hardwood (ash) Ø 4.2 cm, milled and mortised, secured against twisting, easy to grip and not cold for children to touch

Ground anchor
All parts used for anchoring to the ground are made of hot-dip galvanised steel or stainless steel

Chains
Chains made of hot-dip galvanized steel (1.4301 / 1.4571 at extra charge) welded before galvanising, short-linked, without eyelets on the connecting parts, easy to exchange and shorten

Assembly frames between the three modules and in the side walls made of hot-dip galvanised steel tubing, 60 x 60 mm. Firemen's pole made of stainless steel, glass bead blasted.

Drawing board
Drawing board of HPL high-pressure laminated wood, thickness 10 mm, matt surface, colour gentian blue

Stainless steel incline. Sand pipes made of plastic, wall thickness approx. 7 mm. Sand container made of textile-reinforced rubber belt, 8 mm thick. Sand wheel hot-dip galvanised.

Dimensions
(small deviations possible)

Height: 3.35 m
Height pylons: 0.50 / 1.50 m
Length: 7.75 m
Width: 2.00 m
Weight: on request

Installation information

Surfacing requirements
Corresponding to a fall height of ≤ 1.50 m. Sand is required for correct functioning.

Foundations

Play wall
4 items 195 x 100 x 20 cm
Excavation depth 60 cm

Ramp
2 items 30 x 30 x 30 cm
Excavation depth 50 cm

Firemen's pole
1 item 30 x 30 x 30 cm
Excavation depth 60 cm

Attention:
Exact measurements may vary. For all installation dimensions, please refer to the current installation instructions.

Technical changes reserved.