Kun käytät tuotteitamme, hyväksyt evästeiden käyttömme tässä !

olen samaa mieltä
;

VANTAGE® CTHN Negative Pressure Infrared Heaters

Yksilöity viite: robertsgordon-vantageCTHN-straight
Brändi: Roberts-Gordon LLC
Tuoteperhe: Commercial and Industrial Infrared Heating System
Tuoteryhmä: VANTAGE® CTHN
Julkaisupäivä: 2018-10-11
Painoksen numero: 1
Tyyppi: Objekti (yksittäinen objekti)
Lataa (9)

VANTAGE® CTHN negative pressure infrared heaters deliver custom, efficient heating options without the custom price tag. Multi-burner heater layout allows for up to 16 burners per system, covering 1.6 million Btu/h. Heaters are also available in unitary configuration, but utilizing multi-burner systems reduces building penetrations and installation cost pairing multiple burners per pump.

Various zoning options based on controller type are available. Basic operation allows up to two zones, but this controller will not provide feedback on operating conditions or prompt system to post-purge products of combustion from the system. Alternatively, the CORAYVAC® Heating Control allows up to four zones and provides operating feedback conditions. Feedback conditions include power indication for pump and zones with pressure switch and lights. Lastly, added safety and piece of mind, System Control includes two minute post purge, allowing products of combustion to be exhausted outside the building.

Based on the type of layout and the desired heating area, multiple different burner inputs can be paired within the same system layout. Suggested design layouts are shown below.

Input (Btu/h) * (1000): 40, 60, 80, 100, 125, 150, 175, 200

Clearances to Combustibles (Clearances to Combustibles applies to heater hanging horizontally. Dimension listed for distance below heater.): 41in - 76in / 3.4ft - 6.3ft 

Fuel Type: Natural Gas or LPG Propane

Heat Exchanger Tubing: 10ft sections, 4" dia., 16 gauge, first ten feet ALUMI-THERM® steel tubing / Remaining Heat-Treated Aluminized Steel Tubing or Hot Rolled Steel

Reflector and End Caps: .024 Aluminum (Optional- .024 Stainless Steel Type 304) 

Control System: Fully Automatic, Three-Try, 100% Shut-off, Direct Spark Electronic Ignition Control 

Certification: ANSI Z83.20 / CSA 2.34, 2.17

Warranty: Three Year Limited

Gas-fired low-intensity infrared tube heaters are an extremely efficient and high comfort heating solution. Low-intensity tube heaters provide more design flexibility than any other type of infrared heater with the ability to direct heat only where needed in spot heating applications. Or designed to heat and maintain high comfort levels for an entire space, including buildings with high ceilings.

Gas-fired low intensity infrared tube heaters are ideal for applications such as: loading docks (dock doors), auto/vehicle repair shops, warehouses, distribution centers, manufacturing, airplane hangars, high heat-loss areas, greenhouses (e.g. flowers, cannabis, etc...), firehouses, outdoor patios (hospitality), chicken houses, hog houses, horse barns, military, and more!


Materiaali pääasiassa: Steel
Materiaali toissijaisesti: Aluminium
Suunniteltu: United States
Valmistettu: United States

BIMobject-luokka: LVI - Lämmittimet
Uniclass 2.0 Koodi: PR-60-36-72
Uniclass 2.0 Kuvaus: Radiant Tube Heaters
Uniclass 2015 Koodi: Pr_70_60_36_72
Uniclass 2015 Kuvaus: Radiant tube heaters
NBS Reference Koodi: 60-36-72
NBS Reference Kuvaus: Radiant Tube Heaters
CSI MasterFormat 2014 Code: 23 55 23
CSI MasterFormat 2014 Title: Gas-Fired Radiant Heaters
KaikkiLuokat Numero: 23-33 15 17 13
KaikkiLuokat Otsikko: Fuel Fired HVAC Radiant Heaters
Tämä tuote on saatavana:
North America
  • Canada
  • Mexico
  • United States

BIMobject SEEK Properties

HVAC - Heaters

Nimi Arvo
Application Radiant Tube Heater
Fuel Natural Gas ; Propane
Input 40,000 ; 60,000 ; 80,000 ; 100,000 ; 125,000 ; 150,000 ; 175,000 ; 200,000
Mounting Ceiling Mounted

BIMobject®