1704U _ Double U-shaped press fitting with male connection

Elbow press fittings with “U” shape suitable for any type of sanitary system, in the residential, commercial and industrial sectors.

They consist of an external "sleeve" (made of stainless steel) that is deformed "mechanically" to ensure the sealing mechanism. The mechanical deformation guarantees irreversible joints that therefore allow subsurface installation as required by current standards. The steel part is separated from the brass part by a polymer "ring", to avoid the phenomenon known as "galvanic corrosion" and allows the installer to verify the correct connection between the pipe and the fitting.

Their particular "U" shape guarantees a constant flow inside the system avoiding the fluid stagnation and preventing the formation of the bacterium LEGIONELLA

Elbow press fitting with "U" shape threaded Male ISO 228.

Wide range available, for any installation and connection requirement:
Pipes from Ø 16mm to Ø 20 mm.
Male connection from G1/2" (DN15).

Production range:
Art. 1700 Press fitting /Male for pex pipe
Art. 1701-1701R Double press fitting for pex pipe
Art. 1702 Press fitting /Female for pex pipe

Art. 1703 Double elbow press fitting for pex pipe (90°)
Art. 1704 Elbow press fitting Male for pex pipe
Art. 1705 Elbow press fitting Female for pex pipe

Art. 1707-1707R "T" press fitting for pex pipe
Art. 1709 "T" press fitting female for pex pipe

Related products:
Art. 0200 Pe-X pipe 
Art. 2361 Standard bore ball valve for water with Male/Female thread
Art. 2311 Full bore ball valve with Male/Female thread