Käytämme evästeitä palvelujemme tuottamiseen. Kun käytät tuotteitamme, hyväksyt evästeiden käyttömme.

AGS Suction Diffuser - Series W731-D

Yksilöity viite: 00297-victaulic-63
Brändi: Victaulic
Tuoteperhe: Piping Methods
Tuoteryhmä: Pipework Fittings
Julkaisupäivä: 2009-11-25
Painoksen numero: 1
Tyyppi: Objekti (yksittäinen objekti)
Lataa (6)
Victaulic Series W731-D AGS (Advanced Groove System) Suction Diffuser provides optimum flow conditions at the inlet side of the pump. Oversize body provides improved flow patterns around and through the basket. The larger debris pocket keeps any debris out of the flow path below the basket. Victaulic Series W731-D AGS suction diffuser is rated to the working pressure of the flange machined on the outlet end up to a maximum 300 psi/2065 kPa.

The Series W731-D is available with straight, single and double reduction flanged outlets. Flanges may be machined to match most global (ANSI, DIN, GB, JIS, and Australian) flange standards within the diffuser pressure rating.

The body and cap are cast from ductile iron. Located on each side of the body are 1/2”/15 mm NPT pressure taps upstream and downstream of the diffuser. A large drain port is provided to allow for easy service. Each body also includes a cast boss for easy installation of a support base. The diffuser is removable for ease of service and made from perforated stainless steel. Each basket is provided with a removable fine mesh filter for start up.

Materiaali pääasiassa: Carbon Steel
Materiaali toissijaisesti:
Suunniteltu: United States
Valmistettu: United States

BIMobject-luokka: Putkityöt - Putket
IFC-luokitus: Pipe Fitting
Uniclass 1.4 Koodi: L73121
Uniclass 1.4 Kuvaus: Pipes and fittings
Uniclass 2.0 Koodi: PR-62-64
Uniclass 2.0 Kuvaus: Pipe Fittings
Uniclass 2015 Koodi: Ac_10_40_63
Uniclass 2015 Kuvaus: Pipe fitting
NBS Reference Koodi: 62-64
NBS Reference Kuvaus: Pipe Fittings
KaikkiLuokat Numero: 23-27 43 00
KaikkiLuokat Otsikko: Pipe Fittings
Tämä tuote on saatavana:
North America
  • Canada
  • United States

BIMobject SEEK Properties

Plumbing - Pipes

Nimi Arvo
Material Ductile Iron
Material Standard ASTM A-536 - Grade 65-45-12
Nominal Size 14" x 10" | 14" x 12" | 14" x 14" | 16" x 12" | 16" x 14" | 16" x 16" | 18" x 14" | 18" x 16" | 18" x 18" | 20" x 16" | 20" x 18" | 20" x 20" | 24" x 18" | 24" x 20" | 24" x 24"
Pressure Rating 300 psi




This property set allows objects to be COBie UK BIM Level 2 classified

Nimi Arvo
Material Ductile Iron



Nimi Arvo
Diffuser Material 304 Stainless Steel