Archivé

Dual Input Security Module

Overview
The SIGA-SEC2 is an intelligent analog addressable device used to connect one or two normally-open or normally-closed dry contact security circuits.

The actual function of this module is determined by the “personality code” selected by the installer. This code is downloaded to the module from the Signature loop controller during system configuration. The input module gathers information from the devices connected to them and converts it into digital signals. The module’s on-board microprocessor analyzes the signal and decides whether or not to input an alarm, tamper, or maintenance condition.

The intelligence built into every SIGA-SEC2 means that the module can decide when to report information and when to suppress sending information to the host system. As an example, when the SIGA-SEC2 module is disarmed, changes of state that would normally create an alarm are recognized by the module and sent to the host as a background task. This enhances reponse time by removing the burden of normal room activity on the network. Should a trouble or tamper condition be detected these events are immediately transmitted to the host helping to ensure system integrity is maintained. Once the module is armed, alarms are sent immediately to the host.

The module is housed in a small attractive thermo-plastic enclosure designed for surface mounting. Wiring terminals are provided for up to 16 AWG (1.00 mm2) to 22 AWG (0.25 mm2) wires.

Spécifications techniques

Réference unique.edwards-utc-035
Famille de produitsElectronics
Groupe de produitsFire Detection, Monitoring and Alarm
TypeObjet (objet simple)
Date de publication2018-01-07
Numéro d'édition1

Liens

URL du produithttp://edwardsfiresafety.com/
Description techniquehttp://edwards-es.com/Data%20Sheets/8%20--%20Intelligent%20Initiating/E85001-0527%20--%20SIGA-SEC2%20Security%20Module.pdf

En rapport

Matériel principalPlastique
Conçu enÉtats-Unis
Fabriqué enMexique

Classification

BIMobject CatégorieSécurité Incendie - Protection incendie
Classification IFCAlarme
Code ETIMEG000056
Nom ETIMFire protection systems
Nom UNSPSCFire alarm systems
Code UNSPSC46191505
Code Uniclass 2015Pr_75_75_30
Description de l'Uniclass 2015Fire alarm detection devices and control equipment
Code CSI MasterFormat 201428 16 33.36
Titre CSI MasterFormat 2014Intrusion Detection Interfaces to Fire Alarm
Numéro OmniClass23-29 31 13
Titre OmniClassFire Alarm Control Panels
Code CSI UniFormat IID40
Titre CSI UniFormat IIFIRE PROTECTION