Rainscreen Systems Series MB

The anchoring system is composed of vertical C shape profile type K2, K1, GL32 in steel cold formed and with loop on the backside, distance 50 mm from loop to loop, cut in exact length according to the project request. The vertical groove along the vertical profile permit, with the use of special nut, the front connection of the cladding plate and the fast correction of the level and alignment.
The vertical profiles are fixed to the wall at a certain distance each other (normally in the middle of the vertical joint of the cladding) by means of special bracket plate OMEGA shape .The bracket dimension is calculated according to the load and the shape is studied to reduce the thermal bridge. The load brackets are fixed to the structure in concrete by means anchors (mechanical or chemical) and permit an adjustment of ±20 mm of the vertical alignment.The vertical profile is also fixed along the wall by means of threated bar and anchors according to the wall carattestIcs.
The cladding plate type M and B in Stainless steel are design to support and hold the marble in a cut made in the thickness of the stone, on the top and on the base of each tile.
All the anchorage system elements are produced following high standard of quality according to ISO 9001 and are also CE certified according to UNI EN 1090