CARACTÉRISTIQUES Mitigeur thermostatique optoélectronique pour lavabo Alimentation par pile au lithium 6 V Pour perçage standard de Ø 35 mm Arrêt automatique en cas de batterie faible Fonction rinçage hygiénique toutes les 24 heures pendant 1 minute Durée de fonctionnement réglable Débit 6 l/min à 3 bars DESCRIPTION Mitigeur thermostatique électronique pour lavabo avec capteur infrarouge, thermostat pour un réglage individuel de la température et fonction rinçage hygiénique automatique toutes les 24 heures pendant 1 minute, avec pile 6 V type CRP2
Spécification
• Fitting body: chrome-plated brass
• Internal components: stainless steel, brass, plastic
• Connection hoses: Flexible connection hoses made of. Stainless steel with silicone inner tube 3/8 ”, DN10 union nuts
• Cold water: 5 - 20 ° C
• Hot water: 50 - 70 ° C (briefly up to 85 ° C)
• Minimum line pressure: 0.5 bar
• Maximum line pressure: 5 bar
• Volume flow: 6 l / min at 3 bar
• Runtime: depending on the dwell time in the detection range of the infrared sensor
• Follow-up time: 1 second (factory setting). 0.3 - 11 seconds (in 12 steps)
• Anti-blocking time, automatic switch-off after 2 minutes
• Sensor range: 140mm ± 5% adjustable 50 - 200mm (in 24 steps)
• Short-term: continuous run 120 seconds
• Ambient temperature: 4 - 60 ° C
• Protection class: IP65 according to EN60529