Wind Resistant Gutter

Testing

• ANSI/SPRI GT-1 tested to comply with the Standard for Gutter Systems
• Factory Mutual approved for wind uplift protection.
• Miami-Dade Approved (No. 23-0912.08 12/11/28) to comply with the “High Velocity Hurricane Zone of the Florida Building Code.”

Wind Warranty

The 30-Year, 160 MPH Wind Resistant Gutter System Wind Warranty is available on orders to meet a project's specification. It provides a maximum of 30 years, 160 MPH coverage for the repair or replacement of any portion of the roof edge system that has failed due to a defect in Hickman supplied materials.

Finish Warranty

• 30-Year Kynar 500® Finish Warranty is included on coil-coated standard colors.
• Custom post-coated Kynar 500® colors are available with an included 10-Year Kynar 500® Finish Warranty or a 20-Year Kynar 500® Finish Warranty is available upon request.
• Anodized finishes come with a 5-year warranty (no warranty available for coil anodized finishing; Post-coat/Class 1 Batch Anodized is available with a 5-year warranty with an option to increase to a 10-year warranty for an upcharge).
• Please email Technical Services regarding pricing for Anodized finishes.

Standard Sizes (Front/Bottom/Back)

• 5.25”/5.25”/6.25”
• 5.75”/5.75”/6.75”
• 6.25”/6.25”/7.25”
• 6.75”/6.75”/7.75”
• 7.25”/7.25”/8.25”
• 7.75”/7.75”/8.75”

Cover Materials

• 24 ga steel
• 22 ga steel
• .040” aluminum
• .050” aluminum
• .063” aluminum

Colors

Choose from a wide range of standard colors and finishes that meet your job requirements.

Efficient Design

• Accommodates the drainage of large roof areas.
• 1-in. wide extruded aluminum internal bracket securely support larger volumes of water, as well as extreme snow and icing conditions. The bracket comes in two pieces and is adjustable to the proper size. Lok-Tite is provided and required to use with all brackets.
• Manufactured to rigid tolerances and furnished per required drainage capacity/size.
• Adapts easily to optional drainage bars or flow through gravel stops.
• Pre-punch holes in the gutter eliminate the need for drilling; making for easier installation which accommodates the thermal expansion/contraction of the gutter.
• Provided with fasteners and in 12'-0" lengths with pre-punched holes for quicker installation and lower labor costs.
• 6" wide concealed splice plates allow for thermal movement of materials and provides a watertight seal at all joints.
• Factory fabricated miters provide a cleaner, more aesthetically pleasing appearance. This eliminates the need for field fabrication, providing time and labor savings.