Nous utilisons des cookies pour fournir nos services

En utilisant nos services, vous acceptez notre utilisation des cookies

AT Ytong Double layer dividing inner wall U=0,25 W/(m²K) d=550 mm

No d'article: COM_AT_Y_double_layer-internal_d_550
Fabricant: Ytong
Famille de produits: Ytong AAC
Groupe de produits: Composite
Largeur (mm): 1000
Hauteur (mm): 1000
Profondeur (mm): 550
Date de publication: 2017-09-14
Numéro d'édition: 1
Type: Objet (objet simple)
Télécharger (8)
The Ytong Verbundstein is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class P2 is ideal for walls that are optimized for thermal insulation. The quality class P4 is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use.

Advantages:
- thermal conductivity from λ = 0.11 W/(mK)
- Homogeneous, isotropic
- Provides healthy, balanced room climate
- Very high fire protection level: EI90 from 7.5 cm
- Economical and stable in value
- Ergonomic processing

Wall kit for load-bearing or non-load bearing double layer interior walls, made of Ytong Verbundstein PV 4-0,60 units 2 * d=250 mm.

Construction - U=0,25 W/(m²K)

15 mm Internal plastering (e.g. lime-gypsum-cement plaster)
250 mm Ytong Ytong Verbundstein PV 4-0,60 GTIN: 4054640017573
20 mm Mineral wool sound insulation board (e.g. Rockwool Splitrock)
250 mm Ytong Ytong Verbundstein PV 4-0,60 GTIN: 4054640017573
15 mm Internal plastering (e.g. lime-gypsum-cement plaster)

During planning and bulding the masonry shall be taken into account: ÖNORM EN 1996 including the national annexes, ÖNORM B 3209, ÖNORM B 3358-4 as well as statutory and private-law regulations.

Technical characteristics of the Ytong masonry:
Converted average unit compressive strength fB = 5.0 N/mm²
Characteristic masonry compressive strength fK = 2.95 N/mm²
Characteristic initial shear strength of masonry fvk0 = 0.30 N/mm²
Calculated dead load γ = 7.2 kN/m³
Calculated thermal conductivity λ = 0.16 W/(mK)
Heat storage capacity c = 1.0 MJ/kg
Weighted sound reduction index (construction) Rw = 61.5 dB
Fire resistance class EI-M 90 / REI 180 / REI-M 90

The present tool supports you in the planning of masonry made of Ytong Verbundstein, but it does not replace the own technical examination by the user with respect to the intended use and suitability. The use of the tool and changes within the tool must therefore be verified independently. The object proposed by the system must conform to local regulations. The use of the object must therefore be verified independently.


Materiau principal: Autoclaved aerated concrete
Materiau secondaire: Plaster
Créé en: Austria
Fabriqué en: Austria

Catégorie de BIMobject: Walls - Internal Walls
Classification IFC: Wall
Nom UNSPSC: Bricks
Code UNSPSC: 301316
Uniclass 1.4 Code: L83122
Uniclass 1.4 Description: Wall units
Uniclass 2.0 Code: SS-25-13-50
Uniclass 2.0 Description: Masonry Wall Systems
Uniclass 2015 Code: Ss_25_13_50
Uniclass 2015 Description: Masonry wall systems
NBS Reference Code: 25-13-50
NBS Reference Description: Masonry Wall Systems
CSI MasterFormat 2014 Code: 04 22 26
CSI MasterFormat 2014 Title: Autoclaved Aerated Concrete Unit Masonry
Numéro OmniClass: 23-13 35 21 13
Titre OmniClass: Masonry Structural Walls
CSI UniFormat II Code: C1010
CSI UniFormat II Title: Partitions
Ce produit est disponible en:
Europe
  • Austria

Tous les objets BIM sont des produits réels de fabricants réels confirmés et approuvés