The Acrylicon Levelling Screed System resin flooring is a solvent-free, 2 component methacrylic polymer mortar with high compressive and flexural strength. It is characterised by very low linear shrinkage and rapid curing, making it an ideal replacement for cementitious mortars and screeds. Acrylicon Levelling Screed resin flooring can be applied in thicknesses of 5-550mm. The low shrinkage rate enables larger unevenness to be levelled out. The mortar surface resembles that of finished concrete.
Designed as an underlayment screed for Acrylicon Systems, levelling up of uneven substrates, creating falls to drains, bedding in drains, ramps, rail bedding, casting bridge bearings and repairing concrete. Can be used internally or externally.
1-2 hours cure time - rapid installation and minimum downtime.
Hard wearing resin flooring - exceptional resistance to chemicals, abrasion, impact and fire.
Very low shrinkage - ideal for covering large areas.
Non porous resin flooring and suitable for bedding in drains and wet use areas.
Epoxy Flooring
Resin Flooring
Coat
Coating
Floor
Flooring
Flooring System
Design App a Revithez
Töltse be a családokat közvetlenül a Revit modelljébe egyetlen kattintással
Szerezzen egy helyet, ahol könnyebben hozzáférhet az új objektumokhoz, tárolhatja a Revit családokat és együttműködhet csapatával.
Dolgozzon közvetlenül a BIM objektumokkal a Revit mellett 2 GB felhőtárhely – tárolja Revit tartalmát Szerezzen be megtestesült szén-dioxid LCA-t (A1-A3) közvetlenül a Revitből 
3.3