Termékek közzététele
Fig. AF777 - Swivel Attachment
Archivált

Fig. AF777 - Swivel Attachment

Hanger Service: Swivel hanger designed to support horizontal piping from angled structures. Listed for installation at angles between 0 and 90 degrees.
Restraint Service: May be installed as a branch line restraint per the requirements of NFPA 13. The AF777 may be installed directly to the structure or to the Fig. AF779.
Approvals: cULus Listed (UL 203 and UL 203a – 3/8" only). Complies with the hanging and restraint requirements listed in NFPA 13.
Installation:
  • Install mounting bolt into structure or structural attachment and tighten hex nut until the yoke (U-Shaped Bracket) is tight against the structure or attachment.
  • Thread the hanger rod or restraint rod into the hex union until it bottoms. Back rod off a maximum of one turn to allow the hex union to swivel freely.
  • Adjust angle as necessary.
  • If the AF777 is exposed to vibration from the piping system or the structure, jam nuts may be installed on the mounting bolt and the threaded rod.
  • Fire Protection applications shall also be installed per NFPA 13 requirements.
Features: Full 90 degree rotation allows for installation at any angle.
Ordering: Specify figure number, finish, size, and description.
Műszaki specifikáció
  • Egyedi azonosítófig-af777-swivel-attachment
  • TermékcsaládSupport Systems
  • TermékcsoportSeismic Bracing > Seismic Restraints
  • TípusObjektum (egy termék)
  • Megjelenés dátuma2022-06-21
  • Verziószám1
Kapcsolódó adatok
  • Tervezés helyeEgyesült Államok
  • Gyártás helyeEgyesült Államok
Besorolások
  • BIMobject kategóriaVízvezeték-szerelés - Vezetékek
Common.Footer.ValueProp.Image.AltText

Design App a Revithez

Töltse be a családokat közvetlenül a Revit modelljébe egyetlen kattintással

Szerezzen egy helyet, ahol könnyebben hozzáférhet az új objektumokhoz, tárolhatja a Revit családokat és együttműködhet csapatával.

  • PipaDolgozzon közvetlenül a BIM objektumokkal a Revit mellett
  • Pipa 2 GB felhőtárhely – tárolja Revit tartalmát
  • Pipa Szerezzen be megtestesült szén-dioxid LCA-t (A1-A3) közvetlenül a Revitből