A szolgáltatásaink igénybevételével Ön elfogadja a cookie-k (sütik) használatát itt !


ASSA ABLOY FD2250P Folding Door (3+1)(1+3) Manual DLW 2530-5000mm DLH 1850-6000mm

Egyedi azonosító: assa-abloy-fd2250p-folding-door-3-1_1-3
Gyártó: ASSA ABLOY Entrance Systems
Termék család: Folding door
Termék csoport: Panel door
Szélesség (mm): 4800
Magasság (mm): 6000
Publikálás dátuma: 2020-07-09
Verziószám: 1
Típus: Objektum (egy termék)
Letöltés (3)

The ASSA ABLOY FD2250P is a manual folding door designed to require minimal maintenance. As the doors slide open, lifting Teflon coated hinges meaning that the door raises off the floor keeping wear and tear to a minimum. The doors are always visible as they open and close so collision risk is greatly reduced.    

Made with a frame and sandwich construction, a hard profile frame and with fixed fittings and hinges, a robust construction is ensured. A broken cold bridge and tight sealing keep the temperature exchange to a minimum – the door has a U-value of just 1.1W/m2K*. The door can be partially opened meaning that air exchange and temperature loss can also be kept low when passing through the door – even when a pass door is not fitted.  

Different closing and locking options are available and the door can be configured with a range of colors, windows, pass doors with or without window and the option to be automated.   

The ASSA ABLOY FD2250P can be installed on either the front or the back of the exterior wall – so that users can make optimum use of their space. And with a choice of one door leaf or up to four leaves on one side the doors can be folded out of sight.  

* Calculation based on a 5x5m ASSA ABLOY FD2250P folding door

Specifications for ASSA ABLOY FD2250P manual

Insulated folding doors

Manufacturer: ASSA ABLOY Entrance Systems, Lodjursgatan 10, 26144 Landskrona, Sweden

+46 (0)10-4747100 

Project name:                   Classes/location:


Text in bold is an option / configuration possibility


Insulated folding doors with a sturdy frame structure for all climates and environments. All steel parts are galvanized.

For inside or outside installation. Clear opening width x height in mm   

Door leaf

The folding doors are built with a sandwich construction with an internal frame of hot-dip galvanized hollow profiles in which all hardware and hinges are fastened. The outer cladding is steel sheet galvanized and lacquered in Pural and isolated with CFC-free expanded polystyrene, with a door leaf thickness of 57mm. A broken thermal bridge is achieved with spacing of the frame and cladding.

EN 12424 Wind class 5 (4000mm x 3300mm)                                                        

EN12428 Thermal transmission (U-value) 1.1 W/m2K (5000mm x 5000mm, without pass door / window)

Configuration of sections: 2+1, 1+2, 3+1, 1+3, 3+2, 2+3

Standard door leaf colors: RAL3002, RAL5010, RAL7016, RAL9002, RAL9006. Other colors are available as optional extras.


Sealing in black EPDM rubber on all sides of the port and between sections for an optimal seal.

EN12426 Air permeability class 5 (5000mm x 3300mm, without pass door)

EN12425 Water permeability class 3 (5000mm x 3300mm, without pass door)


Galvanized steel hinges, screwed into the steel frame. Fitted with Teflon bushings, so no lubrication is required. The top hinge is protected against unhinging. The bottom hinge is lifted 10mm when turning, to reduce friction on the bottom sealing, improving operation and minimizing wear and tear.


Insulated D4-12 glass with perimeter frame in black aluminum with broken thermal bridge. Standard sill height 1200 mm for row one and 800 mm window height. Number and position according to the layout drawing.

Window size 400/500/600/700 x 800 alt 500x1200 mm.

Pass door

Full-width (section width minus 140 mm) pass door opening outwards inset in the door leaf. Sealings in black EPDM rubber and parts in black aluminum. The door is provided with a lock case and black print. The lead cover is concealed.

Left/right-hinged, window, door closer F1034

Door leaf as active leaf

Designed as an active leaf without threshold, can be opened inwards or outwards, depending on the door's installation side. Outside cremone lock with access from inside, not lockable / lockable with padlock. Concealed cremone lock with access from inside/outside/inside and outside and prepared for lockable with key/not lockable. Lock indication locked door

Operation. The active leaf is delivered with holding bracket.  Left/right-hinged, window.

Door leaf as active leaf under door height 3200mm

Designed as an active leaf and does not have a threshold and can be open inwards or outwards. Door provided with a lock case and black print, outside cremone lock with access from inside, not lockable / lockable with padlock. Concealed cremone lock with access from inside/outside/inside and outside and prepared for lockable with key/not lockable. Lock indication locked door

The active leaf is delivered with holding bracket Right-hinged/left-hinged, window.

Door locking

Outside cremone lock with access from inside, not lockable / lockable with padlock

Concealed cremone lock with access from inside/outside/inside and outside and lockable with key/not lockable

Lock indication locked door


The door is delivered with an autolock to keep the door in fully opened position

Fixed profiles

A complementary fixed section in similar appearance to the door leaf should be installed as demonstrated in the layout drawing

Conformity and installation

The product is tested and conforms to the product standard for industrial doors, EN13241-1. Standard versions conform to or exceed applicable personal safety standards.  Installation of the door must be carried out by an authorized installer having the authority to commission the door during installation in accordance with a valid CE certificate. There is no requirement on start-up inspection before the product is commissioned.

Environmental Product Declaration

Must be provided in the form of a third-party verified EPD and BVB assessment

Future functionality

Annual maintenance service for optimal performance and personal safety must be verified in accordance with the Machinery Directive and in order to maintain the product warranty: 1 year / 2 years / 3 years / 5 years / 10 years. A service agreement is concluded with ASSA ABLOY Entrance Systems.

Elsődleges anyag: Steel
Másodlagos anyag: Polystyrene (EPS)
Tervezés helye: Sweden
Gyártás helye: Sweden

BIMobject kategória: Ajtók - Harmonikaajtók
IFC besorolás: Door
UNSPSC név: Doors
UNSPSC kód: 301715
Uniclass 2.0 Kód: SS-25-30-20-40
Uniclass 2.0 Leírás: Industrial Doorset Systems
NBS Reference Kód: 25-30-20-40
NBS Reference Leírás: Industrial Doorset Systems
CSI MasterFormat 2014 kód: 08 35 13
CSI MasterFormat 2014 cím: Folding Doors
OmniClass szám: 23-17 11 00
OmniClass cím: Doors
Ez a termék elérhető:
  • Denmark
  • Finland
  • France
  • Norway
  • Sweden
  • United Kingdom

AEC Daily

AEC Daily Links

AEC Daily Links

Click these links for more information from AEC Daily

Név Érték
Education https://www.aecdaily.com/sc.php?node_id=1982025&tabidx=education&company=ASSA+ABLOY+Entrance+Systems&subtabidx=osp

BIMobject SEEK Properties

Doors - Folding

Név Érték
Configuration 3+1,1+3
Door Height 2000 mm — 6000 mm
Door Style Folding door
Door Width 2530 mm — 4800 mm
Method Of Operation Manual