EGL ENCLOSED & GASKETED INDUSTRIAL

FEATURES

NEMA 4X, IP66, IP67, and NSF/ANSI Standard 2–Splash Zone certified
Precisely formed lens provides maximum efficiency/reduced glare
Seamless closed-cell gasket, poured and formed in place
Hose-down tested at 1500 PSI at 1.4 GPM to withstand water penetration
Liquid-tight power entry
Standard stainless steel latches protect the fixture from corrosion in harsh environments
Tamper-resistant latches available
Low ambient option for extreme cold environments such as walk-in freezers and refrigerated spaces
High-performance up to 158 lm/W
DLC Compliant
Build America, Buy America and Buy American Act compliant
Wireless in-fixture control solutions available
Made Right Here^® in the USA

Specifikáció

Enclosure	Outer housing consists of 5VA (f1) fiberglass, rated for flame and weather resistance.
Internal Housing	.050″ aluminum.
Latching	Stainless steel latches. Injection-molded polycarbonate latches available (not recommended for use in harsh environments, such as a car wash).
Reflector	95% reflective highly specular aluminum.
Reflective Surfaces	92% minimum average reflective white polyester powder coat bonded to phosphate-free, multi-stage pretreated metal. All internal parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion.
Shielding	Frosted, impact-resistant acrylic.
Electrical	High-quality mid-power LED board. L70 >72,000 hours. -20ºC to 40ºC maximum ambient operating temperature. -40ºC minimum operating temperature with LA40 option. 50/60 Hz constant current driver.
Power Supply	Fixture has holes in each end suitable for 1/2″ electrical trade size liquid-tight connectors. Power supply must be with flexible liquid-tight conduit or cord rated for wet location use.
Mounting	Surface or suspended using four stainless steel mounting straps and two flexible ceiling mount brackets included.
Listings	• cETLus conforms to UL STD 1598 and UL STD 8750. Certified to CAN/CSA STD C22.2 No. 250.0. Suitable for wet locations when specified with watertight hub, STOW or SOOW cord, or mini-male receptacle option. • NSF/ANSI Standard 2–Splash Zone certified, IP65, IP66, and IP67 certified, and rated for NEMA 4X. • DesignLights Consortium qualified product. Not all versions of this product may be DLC qualified, see the DLC Qualified Products List at www.designlights.org/QPL. • Pressure wash rated to 1500 PSI. • RoHS compliant. • Build America, Buy America (BABA) and Buy American Act (BAA) compliant. Request certification at hew.com/buy-american.
Warranty	5-year limited warranty, see details

Műszaki specifikáció

Egyedi azonosítóegl-enclosedgasketed-industrial
TermékcsaládIndoor Luminaires
TermékcsoportVandal Resistant
TípusObjektum (egy termék)
Megjelenés dátuma2025-06-18
Verziószám1

Linkek

Termékadatlaphttps://hew.com/products/EGL
Szerelési útmutatóhttps://hew.com/instruction/EGL2_instructions.pdf
Műszaki leíráshttps://hew.com/specifications/EGL_led.pdf

Kapcsolódó adatok

Elsődleges anyagFém
Másodlagos anyagÜveg
Tervezés helyeEgyesült Államok
Gyártás helyeEgyesült Államok

Besorolások

BIMobject kategóriaVilágítás - Mennyezetre szerelhető
IFC besorolásvilágítási alkatrész
Uniclass 2015 kódEF_70_80
Uniclass 2015 leírásLighting
CSI MasterFormat 2014 kód26 51 13
CSI MasterFormat 2014 névInterior Lighting Fixtures, Lamps, And Ballasts
OmniClass szám23-35 47 11
OmniClass névLighting Fixtures

Termék elérhetősége

Észak-Amerika
Anguilla
Antigua és Barbuda
Aruba
Bahama-szigetek
Barbados
Belize
Bermuda
Brit Virgin-szigetek
Caribbean Netherlands
Costa Rica
Curaçao
Dominikai Közösség
Dominikai Köztársaság
Egyesült Államok
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Kajmán-szigetek
Kanada
Kuba
Martinique
Mexikó
Montserrat
Nicaragua
Panamaváros
Puerto Rico
Saint Kitts és Nevis
Saint Lucia
Saint Pierre és Miquelon
Saint Vincent és a Grenadine-szigetek
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad és Tobago
Turks- és Caicos-szigetek
Virgin-szigetek