Termékek közzététele
Wall-hung boiler  VICTRIX PRO 80 V2 EU
Wall-hung boiler  VICTRIX PRO 80 V2 EU
Wall-hung boiler  VICTRIX PRO 80 V2 EU
Wall-hung boiler  VICTRIX PRO 80 V2 EU
Wall-hung boiler  VICTRIX PRO 80 V2 EU
Wall-hung boiler  VICTRIX PRO 80 V2 EU
    IMMERGAS

    Wall-hung boiler VICTRIX PRO 80 V2 EU

    High-power, wall-hung condensing boiler for heating only. Designed for professional plant rooms, it guarantees high performance with reduced consumption thanks to a wide modulation range up to 1:5 for VICTRIX PRO 150 V2 EU. Compact and linear design featuring a vertical sliding door to protect the electronic control panel. Suitable for floor-standing installations using a specific modular support frame for self-supporting configurations. The standard control electronics allow the management of cascade systems up to 5 boilers, utilizing advanced thermoregulation logic for maximum system flexibility. IPX5D electrical protection rating and standard anti-freeze kit down to -5 °C for outdoor installations, even in unsheltered areas via a dedicated cabinet. The engineering of VICTRIX PRO V2 drastically reduces environmental impact, positioning it in the prestigious eco-friendly Class 6, the highest category for limiting polluting emissions. The new VICTRIX PRO V2 can operate with natural gas, LPG, and hydrogen blends up to 20%.
    Specifikáció
    • Wall-hung, room-sealed, fan-assisted premix condensing modules, featuring high efficiency and forced circulation with variable heat outputs. The generators are certified for installation both in plant rooms and outdoors (with specific protection for unsheltered installations), and can be used in either room-sealed fan-assisted or open-flue fan-assisted configurations. The module consists of: • a total premix combustion system with a cylindrical multigas steel burner, complete with ignition electrodes and an ionization control electrode; • a primary gas/water heat exchanger with a composite casing, including an air vent valve and an internal stainless steel coil; • a stainless steel combustion chamber internally insulated with ceramic panels; • an electronically variable-speed flue gas exhaust fan and a flue gas probe; • a condensate disposal circuit including a siphon and a flexible drain pipe; • a hydraulic group consisting of a flow manifold, a primary circuit pressure transducer, and a low-consumption modulating circulation pump; • a 4-bar system safety valve and a standard discharge funnel; • an overtemperature water safety thermostat; • an electronic board with continuous flame modulation, 1:10 modulation range; • a system flow and return regulation probe, heating flow temperature from 20 to 85 °C; • an IPX5D electrical protection rating, with the possibility of outdoor installation under an additional cover (unsheltered); • standard anti-freeze protection down to -5 °C (-15 °C with a specific optional kit); • pre-arrangement for cascade operation (up to 5 generators with a single safety kit); • possibility of installation using a free-standing support frame kit, suitable for installing one or more VICTRIX PRO V2 units; • possibility of installing the generator inside a cabinet suitable for unsheltered outdoor installation; • possibility of connecting to a remote system management system (optional), when paired with the cascade and zone controller; • compatible with the Ø 80 mm flexible chimney lining system (single installation).
    Műszaki specifikáció
    • Egyedi azonosítóVICTRIXPRO80V2EU
    • TípusObjektum (egy termék)
    • Megjelenés dátuma2026-06-30
    • Verziószám1
    • Magasság (mm)851
    • Szélesség (mm)440
    • Mélység (mm)499
    Kapcsolódó adatok
    • Tervezés helyeOlaszország
    • Gyártás helyeOlaszország
    • Nettó tömeg (kg)61
    Besorolások
    • BIMobject kategóriaHVAC - Kazánok
    • IFC besorolásKazán
    • OmniClass szám23-33 11 00
    • OmniClass névCommercial Boilers

    Termék elérhetősége

    Európa
    Åland
    Albania
    Andorra
    Ausztria
    Belgium
    Bosznia-Hercegovina
    Bulgária
    Ciprus
    Csehország
    Dánia
    Egyesült Királyság
    Észak-Macedónia
    Észtország
    Fehéroroszország
    Feröer-szigetek
    Finnország
    Franciaország
    Gibraltár
    Görögország
    Guernsey
    Hollandia
    Horvátország
    Írország
    Izland
    Jersey
    Lengyelország
    Lettország
    Liechtenstein
    Litvánia
    Luxemburg
    Magyarország
    Málta
    Man-sziget
    Moldova
    Monaco
    Montenegró
    Németország
    Norvégia
    Olaszország
    Oroszország
    Portugália
    Románia
    San Marino
    Spanyolország
    Svájc
    Svalbard and Jan Mayen
    Svédország
    Szerbia
    Szlovákia
    Szlovénia
    Ukrajna
    Vatikán
    Common.Footer.ValueProp.Image.AltText

    Design App a Revithez

    Töltse be a családokat közvetlenül a Revit modelljébe egyetlen kattintással

    Szerezzen egy helyet, ahol könnyebben hozzáférhet az új objektumokhoz, tárolhatja a Revit családokat és együttműködhet csapatával.

    • PipaDolgozzon közvetlenül a BIM objektumokkal a Revit mellett
    • Pipa 2 GB felhőtárhely – tárolja Revit tartalmát
    • Pipa Szerezzen be megtestesült szén-dioxid LCA-t (A1-A3) közvetlenül a Revitből