Termékek közzététele
HP-DS370 Intellivox - Active Beam Shaping Self Powered, Column Loudspeaker Array IP55 Rated - Cop

HP-DS370 Intellivox - Active Beam Shaping Self Powered, Column Loudspeaker Array IP55 Rated - Cop

Active Beam Shaping, Self Powered,
Column Loudspeaker Array, IP55 Rated
The Intellivox HP-DS370 is a self-contained, especially high-power and high-output, 2-way, wide-bandwidth beam-shaping powered loudspeaker column loudspeaker with a high degree of outdoor capability. The HP-DS370 is a modern update to the classic Intellivox DS1608, which was the world’s first commercially available beam-shaping high power loudspeaker array. Since beam shaping’s introduction in 1999 the Intellivox High Power models have been specified to solve the problems of speech intelligibility and musical reinforcement in large highly reverberant spaces and theatres. The Intellivox HP-DS370 is capable of delivering up to 108 dB SPL at 30 meters (100 ft), as well as a frequency response to 18kHz. With an array length of 3.7 meters (12’ 2”) the Intellivox HP-DS370 not only offers long throw capability but also greater control at low frequencies. Intellivox HP-DS370 is capable of covering a substantial audience area while maintaining an even sound pressure level throughout. For full range applications JBL-Axys Beam Shaping Subwoofers can be used in conjunction with the HP-DS370 to provide enhancement and control at low frequencies, resulting in a full-range high-fidelity performance system. The fourteen, high efficiency, 6.5” loudspeakers are arranged in accordance with our patented algorithm. Two coaxially mounted 1” compression drivers extend the HF response.

FEATURES

  • Superb Speech Intelligibility
  • IP-55 Outdoor Capable
  • Integrated Amplification and DSP
  • Slim Unobtrusive Design
  • Extended Frequency Response - up to 18kHz
  • Wide Horizontal Dispersion
  • Vertical Beam Shaping (DDS Technology)
  • 32-bit floating point DSP
  • Control of Vertical Beam Shaping
  • Dual Line Inputs
  • Volume Control
  • Delay (up to 20 seconds)
  • 8 band parametric EQ
  • 8 user definable, password protected presets on board (recallable through third party control devices)
  • AVC (Automatic Volume Control) via build-in ambient mic.
  • Upgradeable firmware
  • Network Ready
  • Integral Surveillance
  • Simulation via DDA, Catt-Acoustic, Odeon and EASE4.3

APPLICATIONS

  • Transport Hubs
  • Sports Arenas
  • Large Places of Worship
  • Lecture Halls and Theatres
  • Large Conference Facilities
  • Atriums
  • Museums

OPTIONS

  • Full range of mounting accessories
  • Color matching service
Műszaki specifikáció
  • Egyedi azonosítóHP-DS370-Intellivox-Active-Beam-Shaping-Self-Powered-Column-Loudspeaker-Array
  • TermékcsaládInstalled Sound
  • TermékcsoportIntellivox Series
  • TípusObjektum (egy termék)
  • Megjelenés dátuma2020-01-06
  • Verziószám1
Kapcsolódó adatok
  • Tervezés helyeEgyesült Államok
  • Gyártás helyeEgyesült Államok
Besorolások
  • BIMobject kategóriaElektronika - Audio készülékek
  • IFC besorolásTárgy
  • ETIM-kódEC000682
  • ETIM-névLoudspeaker set
  • UNSPSC névAudio and visual presentation and composing equipment
  • UNSPSC kód4511
  • Uniclass 2015 kódPr_70_75_36_50
  • Uniclass 2015 leírásLoudspeakers
  • CSI MasterFormat 2014 kód11 52 00
  • CSI MasterFormat 2014 névAudio-Visual Equipment
  • OmniClass szám23-37 15 29 11 13
  • OmniClass névLoudspeakers

Termék elérhetősége

Észak-Amerika
Anguilla
Antigua és Barbuda
Aruba
Bahama-szigetek
Barbados
Belize
Bermuda
Brit Virgin-szigetek
Caribbean Netherlands
Costa Rica
Curaçao
Dominikai Közösség
Dominikai Köztársaság
Egyesült Államok
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Kajmán-szigetek
Kanada
Kuba
Martinique
Mexikó
Montserrat
Nicaragua
Panamaváros
Puerto Rico
Saint Kitts és Nevis
Saint Lucia
Saint Pierre és Miquelon
Saint Vincent és a Grenadine-szigetek
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad és Tobago
Turks- és Caicos-szigetek
Virgin-szigetek
Common.Footer.ValueProp.Image.AltText

Design App a Revithez

Töltse be a családokat közvetlenül a Revit modelljébe egyetlen kattintással

Szerezzen egy helyet, ahol könnyebben hozzáférhet az új objektumokhoz, tárolhatja a Revit családokat és együttműködhet csapatával.

  • PipaDolgozzon közvetlenül a BIM objektumokkal a Revit mellett
  • Pipa 2 GB felhőtárhely – tárolja Revit tartalmát
  • Pipa Szerezzen be megtestesült szén-dioxid LCA-t (A1-A3) közvetlenül a Revitből