FRP reinforcement Kimitech CB system/CBA system

Kimia

FRP reinforcement Kimitech CB system/CBA system

Kimitech CB and CBA fabrics are used for structural consolidations of r.c., steel, wood and masonry elements. They are particularly suitable for plating inflected elements, to reinforce beams and partitions, to confine pillars and, in general, to circle buildings. Kimitech CB and CBA are family of carbon fiber reinforcement fabrics available in different weight and texture, specific for structural consolidation. Its advantages are: high mechanical resistance, low thickness and weight, speed and ease of installation, great workability and ductility, ability to orient and size the reinforcement of the structure as needed, good reversibility, excellent resistance to stray currents, solvents, acids.

Specifikáció

Repair, reinforcement, or seismic retrofitting of concrete and masonry structures using an FRP system equipped with a CVT. The process includes the following application steps: cleaning the substrate, completely removing any loose parts, rounding any edges, and filling any cracks with suitable mortars. Application on the treated surface of a primer based on two-component synthetic resin in water dispersion Kimicover FIX by Kimia S.p.A. or similar product. Apply a bonding layer of Kimitech CMP epoxy resin by Kimia S.p.A. or a similar product, using a brush or roller, directly onto the substrate. Apply Kimitech CB or Kimitech CBA carbon fiber fabric of the chosen weight and texture while still fresh. Impregnation is performed while still fresh with Kimitech CMP two-component, solvent-free epoxy resin by Kimia S.p.A. or a similar product, applied in several coats using a brush or roller. The bonding and impregnation resin must have the following characteristics: frost time: 25 minutes; complete cure at 25°C: 7 days; compressive strength after 7 days ASTM D695-02a: > 50 MPa; maximum tensile stress ASTM D 638: > 30 MPa; tensile modulus ASTM D 638: 1760 MPa. The product will be CE marked as a structural bonding product according to EN 1504-4. The strengthening system thus created will have a CVT and will fall within the identification classes according to the qualification procedures for strengthening systems created on site in point 5.2 of the “Guidelines for the identification, qualification and acceptance control of fiber-reinforced polymer matrix (FRP) composites to be used for the structural strengthening of existing buildings”. The supply and installation of all the materials described above and anything else needed to complete the work are included, excluding anchors which are calculated separately.

Műszaki specifikáció

Egyedi azonosítófrp-kimitech-cb-cba
TípusObjektum (egy termék)
Megjelenés dátuma2026-04-13
Verziószám1

Linkek

Termékadatlaphttps://www.kimia.it/en/pultruded-and-reinforcing-fabrics/kimitech-cb-320

Kapcsolódó adatok

Tervezés helyeOlaszország
Gyártás helyeOlaszország

Besorolások

BIMobject kategóriaÉpítészeti alapanyagok - Támogatás

Termék elérhetősége

Európa
Åland
Albania
Andorra
Ausztria
Belgium
Bosznia-Hercegovina
Bulgária
Ciprus
Csehország
Dánia
Egyesült Királyság
Észak-Macedónia
Észtország
Fehéroroszország
Feröer-szigetek
Finnország
Franciaország
Gibraltár
Görögország
Guernsey
Hollandia
Horvátország
Írország
Izland
Jersey
Lengyelország
Lettország
Liechtenstein
Litvánia
Luxemburg
Magyarország
Málta
Man-sziget
Moldova
Monaco
Montenegró
Németország
Norvégia
Olaszország
Oroszország
Portugália
Románia
San Marino
Spanyolország
Svájc
Svalbard and Jan Mayen
Svédország
Szerbia
Szlovákia
Szlovénia
Ukrajna
Vatikán