A szolgáltatásaink igénybevételével Ön elfogadja a cookie-k (sütik) használatát itt !

Egyetértek
;

Cupolex Rialto Small

Egyedi azonosító: Aerated_flooring_Cupolex_Rialto_Small
Gyártó: Pontarolo Engineering
Termék család: aerated flooring
Termék csoport: Cupolex
Publikálás dátuma: 2017-09-25
Verziószám: 1
Típus: Objektum (egy termék)
Letöltés (5)
CUPOLEX® RIALTO SMALL, patented technology of Pontarolo Engineering spa, is a system to create high raised floors, with non-standard heights or inclined slabs. Can be used alone or together with CUPOLEX® RIALTO technology in the same area, distances between the columns of 57 or 28,5 cm can be obtained. Is used to facilitate the installation or in the cases where a higher structural resistance is required. CUPOLEX® RIALTO permits to create a raised slab with heights between 50 and 250 cm. The system is made of domes, tubes and bases, it is easily and quickly assembled on site: creating a matrix of bases on the prepared plane surface; on top of the bases are placed the plastic tubes of diameter 12,5 cm and variable height depending on the project requirements; at last the domes, 28,5 x 57 cm, are installed on top of the tubes. When mutually connected, all these elements can receive the slab steel reinforcement and the concrete cast giving it a unique geometry with a hollowed space underneath the slab.

Building the aerated floor of maximum height of 250 cm with CUPOLEX® RIALTO SMALL elements of Pontarolo Engineering SpA from San Vito al Tagliamento, Italy, made of a matrix of bases, plastic tubes 125 mm of diameter and height as per project design and plastic dome elements CUPOLEX® RIALTO SMALL with dimension of 28,5x56 cm, installed following manufacturer instructions on a prepared plane surface (not included). These elements, mutually connected, will be able to receive the slab steel reinforcement (not included) and the concrete cast (not included) of class C (various RCK), first filling the tubes than covering the domes with a slab thickness as per project design. Can be used alone or together with CUPOLEX® RIALTO technology in the same area, distances between the columns of 57 or 28,5 cm can be obtained. Is used to facilitate the installation or in the cases where a higher structural resistance is required.


Elsődleges anyag: PE/PP
Másodlagos anyag: PVC
Tervezés helye: Italy
Gyártás helye: Italy

BIMobject kategória: Burkolás - Padlóburkolati rendszerek
IFC besorolás: Floor
UNSPSC név: Flooring
UNSPSC kód: 301617
Uniclass 1.4 Kód: L531
Uniclass 1.4 Leírás: Preformed flooring systems
Uniclass 2.0 Kód: SS-15-05-15
Uniclass 2.0 Leírás: Concrete Foundation Systems
Uniclass 2015 Kód: TE_10_10
Uniclass 2015 Leírás: Wall and floor formwork systems
NBS Reference Kód: 15-05-15
NBS Reference Leírás: Concrete Foundation Systems
CSI MasterFormat 2014 kód: 09 60 00
CSI MasterFormat 2014 cím: Flooring
OmniClass szám: 23-13 31 17
OmniClass cím: Concrete Formwork
CSI UniFormat II kód: A1030
CSI UniFormat II cím: Slab on Grade

BIMobject SEEK Properties

Flooring - Systems

Név Érték
Constituent Materials PE/PP
Intended Function Areated Flooring
Length 570 mm
Thickness 300 mm — 2000 mm
Width 260 mm

COBie UK

UK.COBie.Component

UK.COBie.Component

This property set allows objects to be COBie UK BIM Level 2 classified

Név Érték
Length 570 mm

BIMobject®