Mill House with Crank Handle Pump and Mill Wheel | Playground Equipment | Water Play House

Technical information

Equipment made of natural mountain larch

Core-free
Sawn-timbers core-free, thus decreasing occurrences of cracking and undesired changes in shape

Claddings
Claddings made of mountain larch (4 - 5 cm). Peeled white by hand, natural tree surface remains tangible and perceptible

Plywood
Plywood made of mountain larch, three-layer (3 cm) or five-layer (4 cm). High dimensional stability, waterproof, glued according to DIN EN 13353:2011

Ground anchor
All parts used for anchoring to the ground are made of hot-dip galvanised steel or stainless steel

Floor of 25 mm tongue and groove boards. Steps of stairs made of hardwood, 32 mm.

Mill Wheel
Equipment made of natural mountain larch

Roller bearings
High-quality roller bearings made of chrome steel or stainless steel for rotating elements, easy to maintain and exchange, sealed

Craftsman-like water wheel construction with grooved and slitted wood connections. Shaft, hub and hoop made of stainless steel, glass bead blasted.

Crank Handle Pump
Crank handle pump with extended run-out. Closed piston suction pump; pump made of stainless steel; cylinder and crank housing, mounting plate, piston rod and drive shaft made of stainless steel; the drive shaft brass bearing is replaceable, fitted with nipple for lubrication; cylinder with a liner made of brass alloy and plastic piston (POM); crank ring made of stainless steel, knob made of plastic material; the valve combination installed in the pump connection box for direct connection to mains water Ø 1 inch and a shut-off valve with backflow preventer (type EA) and drainage; external thread 1 inch; min. 2.5 bar water pressure, max. 6 bar; relief valve prevents backflow, water requirement approx. 18 l/min.

Dimensions
(small deviations possible)

Height: 2.50 m
Height floor: 0.60 m
Length: 2.45 m
Width: 3.45 m
Weight: approx. 710 kg

Installation information

Surfacing requirements
Corresponding to a fall height of ≤ 0.60 m

Foundations
4 items 50 x 50 x 40 cm
Excavation depth 60 cm
1 item 30 x 70 x 20 cm
Excavation depth 40 cm
1 item 90 x 50 x 50 cm
Excavation depth 70 cm

Attention:
Exact measurements may vary. For all installation dimensions, please refer to the current installation instructions.

Technical changes reserved.