Stool without back | Playground Equipment | Seating

Technical information

Part of a group of seating furniture (Order No. 4.35 Round Table with 8 Benches, 4.40000 Round Table, 4.40050 Stool with Back, 4.40051 Stool without Back).

Equipment made of non-impregnated mountain larch

Peeled white
Palisades peeled white means that bark, cambium and sapwood are removed, the natural shape of the trunk is preserved and can be experienced

Core-free
Sawn-timbers core-free, thus decreasing occurrences of cracking and undesired changes in shape

Ground anchor
All parts used for anchoring to the ground are made of hot-dip galvanised steel or stainless steel

Stool without Back
Table tops of 10 cm thick boards, connected by additional hardwood tongue boards.

Relief cut
Targeted relief cut as an effective measure against cracks caused by drying. The cut defines the position of the stress equalization in the trunk and minimises natural cracking

• Stool without Back: Diameter 0.33 m, Seat height 0.45 m, Weight 20 kg

Installation information

Surfacing requirements
No requirements

Foundations

(only necessary to immobilise the equipment)

• Per foundation iron: 20 x 20 x 30 cm
• Excavation depth: 50 cm

Attention:
Exact measurements may vary. For all installation dimensions, please refer to the current installation instructions.

Technical changes reserved.