Water Building Site | Playground Equipment | Water Play Installation

Technical information

Equipment made of non-impregnated mountain larch

Peeled white
Palisades peeled white means that bark, cambium and sapwood are removed, the natural shape of the trunk is preserved and can be experienced

Bevel cut
Vertical stand posts with bevelled end grain section as constructive wood preservation measure

Core-free
Sawn-timbers core-free, thus decreasing occurrences of cracking and undesired changes in shape

Claddings
Claddings made of mountain larch (4 - 5 cm). Peeled white by hand, natural tree surface remains tangible and perceptible

Tongue and groove
Tongue and groove planks made of 4 cm solid wood, highly resilient, no trickling of dust / sand, protection against direct rain

Hardwood rungs
Climbing rungs made of hardwood (ash) Ø 4.2 cm, milled and mortised, secured against twisting, easy to grip and not cold for children to touch

Ground anchor
All parts used for anchoring to the ground are made of hot-dip galvanised steel or stainless steel

Chains
Chains made of hot-dip galvanized steel (1.4301 / 1.4571 at extra charge) welded before galvanising, short-linked, without eyelets on the connecting parts, easy to exchange and shorten

Chutes of plastic, wall thickness approx. 7 mm. Sand container of textile-reinforced rubber belt, 8 mm thick. Sand wheel hot-dip galvanised. Description of Mill Wheel and Pump see separate catalogue page.

• Height: 2.55 m
• Floor heights: 0.25 / 0.90 / 1.50 m
• Platform floors: 0.80 x 2.50 m
• Length: 2.60 m
• Width: 3.10 m
• Weight: 900 kg

Installation information

Surfacing requirements
Corresponding to a fall height of ≤ 1.50 m. Sand is required for proper function; effective drainage should be ensured.

Foundations

• 4 items: 60 x 60 x 60 cm
• Excavation depth: 80 cm

Attention:
Exact measurements may vary. For all installation dimensions, please refer to the current installation instructions.

Technical changes reserved.